Panasonic DC-S1HBODY DC-S1H Advanced Operating Manual - Page 538
If a yellow, For details, refer to the operating instructions for your printer.
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 538 highlights
17. Connecting to Other Devices 0 If [USB Mode] is set to [PictBridge(PTP)] in the [Setup] ([IN/OUT]) menu, the camera will be automatically connected to the printer without the [USB Mode] selection screen being displayed. (l 449) 0 Take care not to turn off the camera while printing is in progress. 0 When connecting with the printer is not possible, set [USB Power Supply] to [OFF] and then try connecting again. (l 449) 0 Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed. 0 Disconnect the USB connection cable after printing. 0 Turn off the camera and disconnect the USB connection cable before removing the card from the camera. Otherwise, the recorded data may be damaged. 0 To print images with paper size and layout settings not supported by the camera, set the [Paper Size] and [Page Layout] to [{] and then select the desired settings on the printer. (For details, refer to the operating instructions for your printer.) 0 If a yellow [¥] is displayed, the camera is receiving an error message from the printer. Check that there is no problem with the printer. 0 If the number of prints is high, the pictures may be printed in batches. In this case, the remaining number of prints indicated may differ from the number set. 0 When you print RAW images, JPEG images that were recorded at the same time will be printed. If JPEG images were not recorded, printing is not possible. 0 Images recorded with the following functions cannot be printed: - Video recording/[6K/4K Burst]/[Post-Focus] - [HLG Photo] 538