Panasonic DC-S1HBODY DC-S1H Advanced Operating Manual - Page 511
Connecting by Manual Input, WPA2-PSK], WPA2/WPA-PSK], No Encryption]
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 511 highlights
16. Wi-Fi/Bluetooth Connecting by Manual Input 0 Check the SSID, network authentication, encryption, and encryption key of the wireless access point you are using. 1 In the screen in Step 1 of "[From List]", select [Manual Input]. (l 510) 2 Enter the SSID of the wireless access point you are connecting to, and then select [Set]. 0 For information on how to enter characters, refer to page 464. 3 Select the network authentication. [WPA2-PSK] [WPA2/WPA-PSK] [No Encryption] Supported encryption: [TKIP], [AES] - 4 (When other than [No Encryption] is selected) Enter the encryption key and then select [Set]. 0 Check the operating instructions and settings of the wireless access point. 0 If a connection cannot be made, the signal strength of the wireless access point may be too weak. For details, refer to "Message Displays" (l 553) and "Troubleshooting" (l 557). 0 Depending on your environment, the communication speed with the wireless access point may decrease, or the wireless access point may not be available for use. 511