Panasonic DMC FX100 Digital Still Camera - Page 46
Taking pictures that match the scene being recorded (Scene mode
UPC - 037988986842
View all Panasonic DMC FX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Advanced (Recording pictures) Taking pictures that match the scene being recorded (Scene mode) When you select a scene mode to match the subject and recording situation, the camera sets the optimal exposure and hue to obtain the desired picture. • Refer to P47 to 53 and "About the information " for details about each scene mode. 1 Press 1 for the [SCENE MODE] menu. 2 Press 3/4/2/1 to select the scene mode. A • Press 4 at A to switch to the next menu screen. • You can switch menu screens from any menu item by rotating the zoom lever. 3 Press [MENU/SET] to set. • The menu screen is switched to the recording screen in the selected scene mode. • Press [MENU/SET] and then perform steps 1, 2 and 3 to change the scene mode. ∫ About the information • If you press [DISPLAY] when selecting a scene mode in step 2, explanations about each scene mode are displayed. (If you press [DISPLAY] again, the screen returns to the [SCENE MODE] menu.) • Refer to P40 for information about the shutter speed. • The flash setting is memorized even if the camera is turned off. However, the scene mode flash setting is reset to the initial setting when the scene mode is changed. • When you take a picture with a scene mode that is not adequate for the purpose, the hue of the picture may differ from the actual scene. • If you press 2 when selecting [PORTRAIT] or [HI-SPEED BURST] in step 2, the [SCENE MODE] menu [ ] is selected. If you then select either the [REC] menu [ ] or the [SETUP] menu [ ], you can set the desired items. • The following items cannot be set in scene mode because the camera automatically adjusts them to the optimal setting. - [SENSITIVITY] - [METERING MODE] - [COL.EFFECT] - [PICT.ADJ.] 46 VQT1F52