Panasonic DMC FX100 Digital Still Camera - Page 50
Age display setting, Birthday setting, with [DATE STAMP] P82. - lumix 8
UPC - 037988986842
View all Panasonic DMC FX100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Advanced (Recording pictures) 1 [BABY1]/[BABY2] 2 Press [ MENU /SET ] to display the [SCENE MODE] menu and select a scene mode. (P46) This takes pictures of a baby with a healthy complexion. When you use the flash, the light from it is weaker than usual. You can set two different birthdays by using [BABY1] and [BABY2]. You can display the set age when playing back the pictures and stamp the age on the recorded pictures with [DATE STAMP] (P82). • The age can also be printed on each picture by using the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied). ∫ Age display setting • To have the age displayed, first set the birthday and then be sure to set [WITH AGE] before taking the pictures. ∫ Birthday setting 1 Press 3/4 to select [BIRTHDAY SET.] and then press [MENU/SET]. 2 When a message appears, press 2/1 to select items (Year/Month/Day) and then press 3/4 to set them. 3 Press [MENU/SET] to finish the setting. • The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/ 30 cm (0.98 feet) (Tele) to ¶] • The ISO sensitivity becomes the same as when Intelligent ISO sensitivity mode [ ] is set to a highest ISO sensitivity of [ISO400]. • If you turn on the camera in [BABY1]/ [BABY2], the age and current date and time are displayed for about 5 seconds on the bottom of the screen. • The age display style differs depending on the language setting in the recording mode. • If the age is not properly displayed, check the clock and birthday settings. • If the camera is set to [WITHOUT AGE], the age is not recorded even if the time and birthday are set. This means the age cannot be displayed even if camera is set to [WITH AGE] after taking the pictures. • The birthday setting can be reset with [RESET]. • You cannot use the following functions. - [D.ZOOM] - [SLOW SHUTTER] [PET] Press [ MENU /SET ] to display the [SCENE MODE] menu and select a scene mode. (P46) Select this when you want to take pictures of a pet such as a dog or a cat. This allows you to set the birthday of your pet. You can display the set age when playing back the pictures and stamp the age on the recorded pictures with [DATE STAMP] (P82). • The age can also be printed on each picture by using the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied). Refer to [BABY1]/[BABY2] (P50) for information about age display setting and birthday setting. • The initial setting for the AF assist lamp is [OFF]. (P68) • Refer to [BABY1]/[BABY2] for other information about this mode. 50 VQT1F52