Panasonic DMP-BD55 Blu-ray Dvd Player - Multi Language - Page 32

Changing the unit's settings To select these options, perform steps 1-4 (> 30) Underlined items are the factory presets. "Display" Status Messages ≥Automatic ≥Off Choose whether to show status messages automatically. On-screen Language ≥English ≥Français ≥Español Choose the language for these menus and on-screen messages. Screen Saver Function ≥On: This is to prevent burn-in on the screen. If there is no operation for 10 minutes or more, the displayed screen switches ≥When this is set to "On", the masked-off area on the screen to the other states automatically. becomes gray. - When the Direct Navigator or FUNCTIONS menu is displayed, the display [Only when connecting with an HDMI cable or a component video cable and "HDMI Resolution" (D below) is set to any other mode than "480p", or "Component Video Resolution" (D below) is set to "720p" or "1080i"] returns to the screen saver mode. - When CD or MP3 is played, the display returns to the screen saver mode. (Playback continues.) - When still pictures are shown (except for slideshows), the display returns to the Direct Navigator screen. ≥Off FL Display ≥Bright Changes the brightness of the unit's display. ≥Dim: The display is dimmed. ≥Auto: The display is dimmed during playback and bright except playback. SD Card LED Control [BD55] ≥On ≥Off Set the lighting method for the lamp on the SD card slot. ≥SD inserted: When this unit is turned on and SD card is inserted, the lamp is lighted. License Information about the software used by this unit is displayed. "TV / Device Connection" TV Aspect Set to match the type of television connected. When connected to a 4:3 aspect television: ≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan & Scan (unless prohibited by the producer of the disc). When playing BD-Video, video is output as "4:3 Letterbox". ≥4:3 Letterbox: Video recorded for a widescreen is played in the letterbox style. When connected to a 16:9 widescreen television: ≥16:9: Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio image in the center of the screen. ≥16:9 Full: Video recorded for 4:3 aspect screen is displayed as a horizontally stretched 16:9 image. HDMI Connection ≥Press [OK] to show the following settings. HDMI Video Mode ≥On: Images are output from the HDMI terminal in the resolution set in "HDMI Select "On" when video is output from HDMI AV OUT terminal. ≥Off Resolution". Video from COMPONENT VIDEO OUT terminal is output as "480i". Images are output in the resolution set in "Component Video Resolution". HDMI Resolution* ≥Auto: Automatically selects the output resolution best suited to the The items supported by the connected devices are connected television (1080p, 1080i, 720p or 480p). indicated on the screen as "¢". When any item without "¢" ≥480p ≥1080i ≥720p ≥1080p is selected, the images may be distorted. - When the unit is connected to an amplifier/receiver that does not support the resolution set on the unit, the video cannot be output properly. In this case, use the HDMI cable to connect the unit to the TV and then connect the unit to the amplifier/receiver using a cable other than HDMI. - To enjoy high definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible. 24p Output [BD-V] [DVD-V] ≥On: Images in 24p are output in 24p as they are. When this unit is connected to a TV supporting 1080/24p output via an HDMI cable, this unit displays each frame at However, - when video is being output at 24 frames, images from any other terminal 1/24 second intervals - the same interval originally shot with the film camera. ≥When playing DVD-Video, set to "On" and then set "24p" in "Video" (> 29) to "On" ≥Off than the HDMI terminal may not be output properly. - [BD-V]: when images other than 24p are played, images are output at 60p. HDMI RGB Output Range ≥Standard: The video is output as it is. Effective when connected to a device that only supports ≥Enhanced: When the black and white contrast of a video is low, the signal RGB output. is enhanced to reproduce clear video. HDMI Audio Output ≥On: This setting selects whether or not to output audio from ≥Off: When the TV is connected to this unit using an HDMI cable, and this unit HDMI. is also connected to other devices, such as an amplifier/receiver using an optical digital audio cable or a coaxial cable [BD55]. VIERA Link ≥On: Set to use "HDAVI Control" function when connected with ≥Off: Select when you do not want to use "HDAVI Control". an HDMI cable to a device that supports "HDAVI Control". Component Video Resolution* ≥480i ≥480p ≥720p ≥1080i This sets the video output resolution when using the Even if you select "720p" or "1080i", the video output resolution is restricted to component video terminal. "480p" when images of DVD-Video discs are output from the COMPONENT VIDEO OUT terminals. Analog Audio Output [BD55] ≥2ch (Downmix) + 5.1ch: When connecting to 2ch AUDIO OUT or 5.1ch AUDIO When connected with AUDIO OUT terminals, you can set the unit to output the best possible sound for your speakers. ≥7.1ch: OUT. (> 34) When connecting to 7.1ch AUDIO OUT. (> 34) * In this unit, a P4HD (> 47) video processor is used to provide video of optimal resolution to the connected TV. 32 RQT9243 or RQT9350