Panasonic DMP-BD55 Blu-ray Dvd Player - Multi Language - Page 8

Audio and video information About audio from audio output terminals Before connecting, read the table below, and confirm the desired audio type and necessary settings ("BD-Video Secondary Audio", "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD"). (> 9) ≥The number of channels listed is the maximum possible number of output channels. HDMI AV OUT/DIGITAL AUDIO OUT (Coaxial [BD55]/Optical) Terminal "Dolby D/Dolby D +/Dolby TrueHD"/ "DTS/DTS-HD" "BD-Video Secondary Audio" Dolby Digital/ Dolby Digital EX*5 Dolby Digital Plus Dolby TrueHD DTS Digital Surround/ DTS-ES*5 DTS-HD High Resolution Audio DTS-HD Master Audio 7.1ch LPCM HDMI AV OUT "Bitstream"*1 "PCM"*3 "On"*2 Dolby Digital/ Dolby Digital EX*6 Dolby Digital DTS Digital Surround/ DTS-ES*6 DTS Digital Surround Down-mixed 5.1ch PCM "Off" Dolby Digital/ Dolby Digital EX Dolby Digital Plus Dolby TrueHD DTS Digital Surround/ DTS-ES DTS-HD High Resolution Audio DTS-HD Master Audio 7.1ch PCM "On" "Off" 5.1ch PCM 5.1ch PCM*2 7.1ch PCM [DVD-V]: 5.1ch PCM [BD-V]: 7.1ch PCM*4 7.1ch PCM*4 Down-mixed 5.1ch PCM*2 7.1ch PCM DIGITAL AUDIO OUT "Bitstream" "PCM" "On"/"Off" Dolby Digital/ Dolby Digital EX*6 "On"/"Off" Dolby Digital DTS Digital Surround/ DTS-ES*6 Down-mixed 2ch PCM DTS Digital Surround Down-mixed 2ch PCM AUDIO OUT (Analog) Terminal "BD-Video Secondary Audio" Dolby Digital/ Dolby Digital EX Dolby Digital Plus Dolby TrueHD DTS Digital Surround/ DTS-ES DTS-HD High Resolution Audio DTS-HD Master Audio 7.1ch AUDIO OUT [BD55] "On" "Off" 5.1ch AUDIO 2ch AUDIO OUT [BD55] OUT "On"/"Off" "On"/"Off" 5.1ch 5.1ch*2 7.1ch [DVD-V]: 5.1ch [BD-V]: 7.1ch*4 5.1ch 2ch 7.1ch*4 7.1ch LPCM Down-mixed 5.1ch*2 7.1ch ≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary. *1 When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or down-mixed 2ch PCM (e.g., TV). *2 [BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if "BD-Video Secondary Audio" was set to "Off". *3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM. *4 [BD-V]: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications. *5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES. *6 [BD-V]: When "BD-Video Secondary Audio" is set to "On", Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format. Enjoying High Bit rate Audio of BD-Video [BD-V] This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above) NECESSARY CONNECTIONS ≥HDMI AV OUT terminal: Connect this unit to your amplifier/receiver supporting HDMI (High Bit rate Audio) using a High Speed HDMI cable (> 11). ≥7.1ch AUDIO OUT terminal [BD55]: Connect this unit to your amplifier/receiver supporting 7.1 channels using audio cables (> 12). NECESSARY SETTINGS (> 9) ≥Set "BD-Video Secondary Audio" to "Off". ≥HDMI AV OUT terminal: Set "Dolby D/Dolby D +/Dolby TrueHD" or "DTS/DTS-HD" to "Bitstream" or "PCM" . ≥7.1ch AUDIO OUT terminal [BD55]: Set "Analog Audio Output" to "7.1ch". 8 ≥The clicking sound on the menu and audio with secondary video in picture-in-picture mode (> 21) is not output. RQT9243 or RQT9350