Panasonic DMP-BD605K Blu Ray Disc Player - Multi Language - Page 13

Getting started G Connecting to 5.1ch AUDIO OUT terminal [BD80] Multi channel speakers   Back of the unit Connect Audio cables to terminals  corresponding to the speakers you have connected.  Amplifier/receiver H Connecting to 2ch AUDIO OUT terminal OR Television AUDIO IN R L VIDEO IN Amplifier/receiver ≥"Analog Audio Output" should be set to "2ch (Downmix) + 5.1ch". (> 34) ≥Enjoying High Bit rate Audio of BD-Video (> 8) ≥Using this connection, 7.1 channel surround is mixed down to 5.1 channel audio. ≥When connecting amplifier/receiver or other devices with HDMI AV OUT terminal, set "HDMI Audio Output" to "Off". (> 34) (Otherwise, depending on the specifications of connected devices, the audio from AUDIO OUT terminal may be output as two channels only.) ≥When connecting a TV (> 11, A) with HDMI AV OUT terminal, set "HDMI Audio Output" to "Off". (> 34) (Otherwise, the sound may not be output with the desired audio.) ≥Depending on how the disc was recorded, the audio may not be output properly on the number of channels desired. Cable connections a Front speaker (L/R) b Surround speaker (L/R) c Center speaker d Subwoofer ≥"Analog Audio Output" should be set to "2ch (Downmix) + 5.1ch". (> 34) ≥Using the two analog audio channels this connection provides, you will not be able to use any surround sound audio modes. AUDIO IN Audio/Video cable (included) Back of the unit AC power connection 2ch AUDIO OUT Cooling fan Back of the unit AC power supply cord (included) To a household AC outlet (AC 120 V, 60 Hz) ≥For best results this unit should be connected directly to an AC outlet. ≥This unit consumes a small amount of AC power ("Quick Start": "Off", less than 0.5 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected. 13 RQT9378