Panasonic DMP-BD605K Blu Ray Disc Player - Multi Language - Page 34
Display continued, TV / Device Connection - viera
UPC - 037988984190
View all Panasonic DMP-BD605K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Changing the unit's settings To select these options, perform steps 1-4 (> 32) Underlined items are the factory presets. "Display" (continued) FL Display Changes the brightness of the unit's display. SD Card LED Control [BD80] Set the lighting method for the lamp on the SD card slot. License ≥Bright ≥Dim: ≥Auto: The display is dimmed. The display is dimmed during playback and bright except playback. ≥On ≥SD inserted: ≥Off When this unit is turned on and SD card is inserted, the lamp is lighted. Information about the software used by this unit is displayed. "TV / Device Connection" TV Aspect Set to match the type of television connected. When connected to a 4:3 aspect television: ≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan & Scan (unless prohibited by the producer of the disc). When playing BD-Video, video is output as "4:3 Letterbox". ≥4:3 Letterbox: Video recorded for a widescreen is played in the letterbox style. When connected to a 16:9 widescreen television: ≥16:9: Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio image in the center of the screen. ≥16:9 Full: Video recorded for 4:3 aspect screen is displayed as a horizontally stretched 16:9 image. HDMI Connection ≥Press [OK] to show the following settings. HDMI Video Mode Select "On" when video is output from HDMI AV OUT terminal. ≥On: ≥Off Images are output from the HDMI terminal in the resolution set in "HDMI Resolution". Video from COMPONENT VIDEO OUT terminal is output as "480i". Images are output in the resolution set in "Component Video Resolution". HDMI Resolution* The items supported by the connected devices are indicated on the screen as "¢". When any item without "¢" is selected, the images may be distorted. ≥Auto: Automatically selects the output resolution best suited to the connected television (1080p, 1080i, 720p or 480p). ≥480p ≥720p ≥1080i ≥1080p - When outputting 1080p signal, we recommend using High Speed HDMI Cables that have the HDMI logo (as shown on the cover) and are less than 5.0 meters to prevent video distortion etc. - When the unit is connected to an amplifier/receiver that does not support the resolution set on the unit, the video cannot be output properly. In this case, use the HDMI cable to connect the unit to the TV and then connect the unit to the amplifier/receiver using a cable other than HDMI. - To enjoy high definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible. 24p Output [BD-V] [DVD-V] ≥On: When this unit is connected to a TV supporting 1080/24p output Images in 24p are output in 24p as they are. However, via an HDMI cable, this unit displays each frame at 1/24 second intervals - the same interval originally shot with the film camera. ≥When playing DVD-Video, set to "On" and then set "24p" in "Video" (> 31) to "On" ≥Off -when video is being output at 24 frames, images from any other terminal than the HDMI terminal may not be output properly. -[BD-V]: when images other than 24p are played, images are output at 60p. HDMI RGB Output Range Effective when connected to a device that only supports RGB output. ≥Standard: ≥Enhanced: The video is output as it is. When the black and white contrast of a video is low, the signal is enhanced to reproduce clear video. HDMI Audio Output This setting selects whether or not to output audio from ≥On: ≥Off: When the TV is connected to this unit using an HDMI cable, and this unit HDMI. is also connected to other devices, such as an amplifier/receiver using an optical digital audio cable or a coaxial cable [BD80]. VIERA Link ≥On: Set to use "HDAVI Control" function when connected with ≥Off: Select when you do not want to use "HDAVI Control". an HDMI cable to a device that supports "HDAVI Control". Component Video Resolution* This sets the video output resolution when using the component video terminal. ≥480i ≥480p ≥720p ≥1080i Even if you select "720p" or "1080i", the video output resolution is restricted to "480p" when images of DVD-Video discs are output from the COMPONENT VIDEO OUT terminals. Analog Audio Output [BD80] ≥2ch (Downmix) + 5.1ch: When connecting to 2ch AUDIO OUT or 5.1ch AUDIO When connected with AUDIO OUT terminals, you can set OUT. (> 37) the unit to output the best possible sound for your speakers. ≥7.1ch: When connecting to 7.1ch AUDIO OUT. (> 37) * In this unit, a P4HD (> 51) video processor is used to provide video of optimal resolution to the connected TV. 34 RQT9378