Panasonic DMP-BD605K Blu Ray Disc Player - Multi Language - Page 37
Changing the speaker setting to suit your speakers, Preparation, Speaker presence and size, Delay time
UPC - 037988984190
View all Panasonic DMP-BD605K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Changing the speaker setting to suit your speakers [BD80] When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the amplifier/receiver. The settings are effective when connecting to analog 7.1ch/5.1ch AUDIO OUT terminal. Preparation 1 Set "Analog Audio Output" to "2ch (Downmix) + 5.1ch" or "7.1ch". (> 34) A message is displayed. 2 Press [OK]. Center (C) Front (L) Complete Test L ms 0.0 C dB 0.0 R dB dB 0.0 0.0 Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS Front (R) Subwoofer (SW) dB ms dB LB 0.0 0.0 0.0 RB (LS) Surround (RS) (LB) Surround back(RB)* * Surround back channel is enabled only when setting "Analog Audio Output" to "7.1ch". Speaker presence and size ( L C R SW LS ) RS LB RB Set all the connected speakers individually. 1 Press [3, 4, 2, 1] to select the speaker icon and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. Icon examples: Surround speaker (LS) LS LS Large ≥Large: ≥Small: Small No Select when the speaker supports low-frequency (under 100 Hz) reproduction. Select when the speaker does not support low-frequency reproduction. In order to make an ideal listening environment, settings of speaker sizes may be automatically adjusted. For example, if the subwoofer is set to "No", the front speakers will automatically be set to "Large". (In this case, we recommend connecting a speaker that can reproduce bass below 100 Hz.) Delay time ( ms ) 0.0 For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference. If either distance A or C is less than B (D right), find the difference in the relevant table and change to the recommended setting. 1 Press [3, 4, 2, 1] to select the delay time box ( ms 0.0 ) and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. 5.1ch speaker connection 7.1ch speaker connection Approximate room dimensions C C L LS C R AB SW C RS L LS LS LB C R SW AB C C RS RS RB LS RS LB RB Circle of constant primary listening distance : Actual speaker position : Ideal speaker position A B C : Primary listening distance A Center speaker Difference Approx. 34 cm (1 ft. 1 in.) Approx. 68 cm (2 ft. 2 in.) Approx. 102 cm (3 ft. 4 in.) Approx. 136 cm (4 ft. 5 in.) Approx. 170 cm (5 ft. 6 in.) Setting 1.0 ms 2.0 ms 3.0 ms 4.0 ms 5.0 ms C Surround/Surround back speakers Difference Approx. 170 cm (5 ft. 6 in.) Approx. 340 cm (11 ft. 1 in.) Approx. 510 cm (16 ft. 8 in.) Setting 5.0 ms 10.0 ms 15.0 ms Channel balance ( dB ) 0.0 1 Select "Test" and press [OK]. A test signal is output. Front (L)_-)Center (C)_-)Front (R)_-)Surround (RS) : ; Surround (LS)(- Surround Back (LB) (- Surround Back (RB) 2 While listening to the test signal, press [3, 4] to adjust the volume of each speaker Front speakers: 0.0 to s6.0 dB Center and surround speakers: 0.0 to s12.0 dB 3 Press [OK]. The test signal stops. ≥No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste. To finish the speaker setting Press [3, 4, 2, 1] to select "Complete" and press [OK]. Settings 37 RQT9378