Panasonic DMPBDT100 DMPBDT100 User Guide - Page 29
Audio, Display
UPC - 885170017160
View all Panasonic DMPBDT100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Audio Dynamic Range Compression You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) ≥ "Auto" is effective only when playing Dolby TrueHD. Digital Audio Output (> 36) Press [OK] to show the following settings: Dolby D/Dolby D +/Dolby TrueHD DTS/DTS-HD Select the audio signal to output. ≥ Select "PCM", when the connected equipment cannot decode the respective audio format. ≥ Not making the proper settings may result in noise. BD-Video Secondary Audio Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (> 19) ≥ If "Off" is selected, the unit outputs the primary audio only. PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT. ≥ If "On" is selected, the signals that are converted to 48 kHz are output. ≥ If "Off" is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally. ≥ Signals are converted to 48 kHz despite the settings in the following cases: - when the signals have a sampling frequency of 192 kHz - when the disc has copy protection - when "BD-Video Secondary Audio" is set to "On" Downmix Select the downmix system of multi-channel to 2 channel sound. ≥ Select "Surround encoded", when the connected equipment supports the virtual surround function. ≥ There is no effect on "Bitstream" via HDMI AV OUT and DIGITAL AUDIO OUT. ≥ The audio will be output in "Stereo" in the following cases; - AVCHD playback - Playback of secondary audio (including the button click sound). 7.1ch Audio Reformatting Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch. ≥ If "Off" is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.) Audio reformatting is enabled in the following cases: ≥ When you have selected "PCM" in "Digital Audio Output". ≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM. Audio Delay Mis-sync between the video and audio is corrected by delaying the audio output. Display Status Messages Choose whether to show status messages automatically. On-screen Language Choose the language for menus and on-screen messages. Screen Saver Function This is to prevent burn-in on the screen. ≥ When this is set to "On": If there is no operation for 10 minutes or more, Direct Navigator screen switches to FUNCTIONS screen automatically. ≥ While playing and pausing, etc., this function is not available. ≥ As for Music [CD-DA] or MP3, regardless of the setting, if there is no operation for a while, Direct Navigator screen switches to the other states automatically. FL Display Changes the brightness of the unit's display. ≥ If "Auto" is selected the display is dimmed during playback and bright not during playback. License Information about the software used by this unit is displayed. Settings 29 VQT2U33