Panasonic DMRE75V DMRE75V User Guide - Page 61
Select DC channel with [CH, Press [VHS].
View all Panasonic DMRE75V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Advanced Operations DVD VHS ∫ Manual Transfer (Dubbing) You can specify the position to start transfer (dubbing) of the program recorded on the disc to the tape. ≥Copy-guarded discs cannot be dubbed. Most discs are copy- guarded to prevent illegal reproduction and they cannot be recorded with the following procedure. Preparation ≥Select the unit viewing channel (or the AV input) on the TV. DVD ≥Insert the disc containing the program to be copied (l 20). ≥Check the channel. If "TP" channel is selected, transfer (dubbing) does not work properly. - When the "TP" channel is selected on DVD, you cannot select the "DC" channel. VHS ≥Insert a video cassette with an intact erasure prevention tab. (l 48) ≥Confirm that the remaining tape time is sufficient for recording. (l 57) [1] Press [DVD] and press [1, PLAY]. Start playing the disc and find the recording start point. ≥Select the audio to be played (the audio to be recorded) beforehand. [RAM] ≥When the DVD-R is inserted, you cannot select the audio. [2] Press [;, PAUSE] at the start point of the recording. [3] Press [VHS]. [4] Select "DC" channel with [CH, W, X]. ≥The DVD picture is displayed on the TV. [5] Press [1, PLAY]. Start playing the video cassette and find the recording start point. [6] Press [;, PAUSE] at the start point of the recording, then press [¥, VHS REC] to pause. Put the unit in the recording standby mode. [7] Press [REC MODE] to select the recording mode. [8] Press [;, PAUSE]. ≥VHS recording and disc play start at the same time. To pause or stop Manual Transfer (Dubbing) You cannot stop or pause on DVD and VHS at the same time ∫ To pause or stop recording Press [VHS] and press [;, PAUSE] or [∫, STOP]. ∫ To pause or stop play Press [DVD] and press [;, PAUSE] or [∫, STOP]. ∫ When transfer (dubbing) is started, the following operations also start automatically: ≥"Status Messages" on Display ) "Off" (l 45) ≥Audio output when playing back DVD ) Stereo (L R) ∫ Only the following operations are allowed while transfer (dubbing): ≥Turning the unit off/on ≥Stopping transfer (dubbing) by pressing [STOP] Note: ≥When the transfer (dubbing) is already started, you can switch the output manually. ∫ About DC channel (DC: Dubbing input channel) ≥DC channel can be recorded only when the VHS input channel is set to "DC". ≥When you play back a tape with the channel set to "DC", the DVD picture is displayed on the TV screen. 61