Panasonic DMRE95HPS DMRE95 User Guide - Page 54

Frequently asked questions Reference Set up What equipment is necessary to play multi channel surround sound? ≥ DVD-Video: You can play DVD-Video multi channel surround by digitally connecting an amplifier equipped with a Dolby Digital and a DTS decoder. ≥DVD-Audio: This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound. Are the headphones and speakers directly connected to the unit? ≥You cannot directly connect to the unit. Connect through the amplifier, etc. The television has both S-VIDEO IN terminal and COMPONENT VIDEO IN terminals. Which terminal should I connect with? ≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the color difference signals (PB/PR) and luminance signal (Y) separately in order to achieve high fidelity in reproducing colors. If the television is compatible with progressive output, a high quality picture can be output because this unit's component video output terminal outputs a progressive output signal. Is my television progressive output compatible? ≥All Panasonic televisions that have 480P input terminals are compatible. Consult the manufacturer if you have another brand of television. Disc Can I play DVD-Video, DVD-Audio and Video CDs bought in another country? ≥You can play them if the video standard is NTSC. ≥However, you cannot play DVD-Video if their region number does not include "1" or "ALL". Can a DVD-Video that does not have ≥The DVD-Video region number indicates the disc conforms to a standard. You cannot a region number be played? play discs that do not have a region number. Please tell me about DVD-R and DVD-RW compatibility with this unit. ≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that are finalized. ≥This unit also records and plays high speed recording compatible discs. ≥This unit does not record or play DVD-RW. Please tell me about CD-R and CDRW compatibility with this unit. ≥This unit plays CD-R/CD-RW discs (audio recording discs) which have been recorded under one of the following standards: CD-DA, MP3 and Video CD. Close the session or finalize the disc after recording. ≥You cannot write to a CD-R or CD-RW with this unit. Recording Can I record from a commercially purchased video cassette or DVD? ≥Most commercially sold video cassettes and DVD are copy protected; therefore, recording is usually not possible. Can a DVD-R recorded on this unit be played on other equipment? ≥You can play on DVD-R compatible players after finalizing the disc on this unit; however, due to the condition of the recording, play may not be possible. How many times can I write to a DVD-RAM disc? ≥You can write to the disc approximately 100,000 times depending upon the conditions of use. Can I high speed transfer (dub) to a disc? ≥You can record up to 32k recording speed to DVD-R and up to 24k recording speed to DVD-RAM when using a high speed compatible disc. Can I record digital audio signals using this unit? ≥You cannot record digital signals. The digital audio terminals on this unit are for output only. (The audio recorded using the DV automatic recording function from a digital video camcorder, for example, is recorded digitally.) Can a digital audio signal from this unit be recorded to other equipment? ≥You can record if using the PCM signal. When recording DVD, change the "Digital Audio Output" settings to the following from the SETUP menu. -PCM Down Conversion On -Dolby Digital PCM -DTS PCM However, only -As long as digital recording from the disc is permitted. -As long as the recording equipment is compatible with a sampling frequency of 48 kHz. ≥You cannot record MP3 signals. Can I switch to SAP during recording? ≥With HDD and DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO]. ≥With DVD-R, you cannot. Change before recording with "Select MTS" in the SETUP menu. TV Guide On ScreenTM system I do not want TV Guide On ScreenTM system to automatically appear on screen. ≥Select "Off" in "Review options" menu, so that TV Guide On ScreenTM system appears only when you press [TV GUIDE]. RQT7392 54 I do not want to use TV Guide On ScreenTM system. ≥Set the unit with "Auto Channel Setting". Note that you can set timer recording only manually after you set the unit with "Auto Channel Setting". Page 9 - 9 7 - - Cover - - - - 14, 27 - - 45 - 37 - 49 - 17 48 23 50