Panasonic DMRE95HPS DMRE95 User Guide - Page 58

Troubleshooting guide Reference Recording/Timer recording/Transferring (dubbing) (Continued) Cannot transfer (dub) to a DVD- ≥When recording to the HDD, set "DVD-R High-Speed Recording" to "On" in the SETUP R disc using the high speed menu. mode. When transferring (dubbing), it takes a long time even when high speed mode is selected. ≥Use a disc that is compatible with high speed recording. Even if the disc is high speed recording compatible, the maximum speed recording rating may not be possible due to the condition of the disc. ≥It takes longer than normal to transfer (dub) many titles. ≥You cannot high speed transfer (dub) to DVD-R titles longer than 6 hours when using other Panasonic DVD recorders that are not compatible with EP (8 hour) mode recording. An unusually loud sound coming from the rotating DVD-R. ≥When recording or high speed transferring (dubbing) to a DVD-R, the sound of the disc rotating may be louder than normal; however, this is not a problem. The DV automatic recording function does not work. ≥If images cannot be recorded or if the recording is aborted, check the connections and DV equipment settings. ≥You cannot start recording until the images from the DV equipment appear on the television. ≥Recording may not be performed as desired if the time codes on the tape in the DV equipment are not successive. ≥Depending on the equipment, the DV automatic recording may not operate properly. Page 48 - - - - 41 - - - TV Guide On ScreenTM system Television program list does not display when [TV GUIDE] is pressed. "Cable code -INCOMPLETE-" appears in the TV Guide On ScreenTM system setup. As soon as the unit is turned on, and when you try to start timer recording, the TV Guide On ScreenTM system setup begins. Several days of television program listings are blank. Channel changes even when no operation is performed. ≥Leave the unit turned off over night. ≥Check the connection and set up the TV Guide On ScreenTM system again. ≥Consult your service provider if you are using a cable TV box. ≥Television program list is not available in your area. Set the unit using "Auto Channel Setting". Note that you can only set timer recording manually after you set the unit using "Auto Channel Setting". ≥The unit cannot find the correct IR code for the cable TV box. Consult your service provider. ≥Even if you do not want to use the TV Guide On ScreenTM system, you need to complete the TV Guide On ScreenTM system setup (until [ENTER] is pressed after the "Watch TV" message screen is displayed). It will not be displayed after this point. ≥Immediately after beginning use there are several days of blank listings. You can display program listings up to 8 days forward without any blank listings by downloading program lists continuously over several days. ≥When the unit is connected to a cable TV box, the cable TV box channel changes while the unit is turned off in order to download the television program list. - 7, 8, 10 - 50 - 10 - - Play Play fails to start even when ≥Insert the disc correctly with the label facing up. 24 [1] (PLAY) is pressed. ≥You tried to play a blank DVD-RAM/DVD-R, or disc unplayable on this unit. 14 Play starts but then stops ≥You may be able to transfer (dub) a "One time only recording" title that was recorded to DVD- - immediately. RAM using a different Panasonic DVD Recorder to this unit's HDD, but play is not possible due to copyright protection. ≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players 48 that are compatible with DVD-RAM. In this case use EP (6H) mode. ≥You cannot play discs during DV automatic recording. - Audio and video momentarily ≥This occurs between play list chapters. - pause. ≥This occurs between chapters and with partially deleted titles on finalized DVD-R that have - been transferred (dubbed) using the high speed mode. DVD-Video is not played. ≥Some DVD-Video cannot be played when you change the ratings level. 48 Alternative soundtrack and ≥The languages are not recorded on the disc. - subtitles cannot be selected. ≥You may have to use the disc's menus to select languages. - No subtitles. ≥When progressive output is on, closed captions cannot be displayed. - ≥Subtitles are not recorded on the disc. - ≥Turn the subtitles on. 30 Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. - You have forgotten your ratings ≥While the disc tray is open, press [DVD] then press and hold [D] and [E] on - password. the main unit at the same time for 5 or more seconds. Quick View does not work. ≥This does not work if the setting is "Off" in "Search Audio & PLAY k1.3". 48 ≥This does not work when audio is other than Dolby Digital. - ≥This does not work when recording is in XP or FR mode. [RAM] - The resume play function does ≥This function only works when "PLAY" is flashing on the unit display. - RQT7392 not work. ≥Memorized positions are canceled when the unit is turned off or when the tray is opened. The - 58 memorized position on the play list is also canceled when the play list and title are edited.