Panasonic DVD-S52S DVDS52 User Guide - Page 18

Using On-Screen Menus ∫ Audio Menu You can enjoy comfortable, analog-like sound. [DVD-VR] [DVD-V] (Discs recorded with 48 kHz only) [DVD-A] (Discs recorded with 44.1 kHz and 48 kHz only) [VCD] [CD] Sound [WMA] [MP3] (Disc recording is other than 8 kHz, 16 kHz or 32 kHz) Enhancement On ,------. Off ≥ This does not work when Night Sound Mode, H.Bass(➜ page 11), Advanced Surround or Multi Re-master (➜ page 12) is on. ≥ This may not work depending on the disc's recording. ≥ This does not work with [MP3] on DVD-RAM or DVD-R/RW. Attenuator With AUDIO OUT connections (➜ page 6) Switch on if sound is distorted. On ,------. Off ∫ Display Menu Information On ,------. Off Subtitle Position 0 to s60 (in 2 units) Subtitle Brightness Auto, 0 to s7 To select how to show images made for 4:3 aspect screens on a 16:9 aspect television 4:3 Aspect Normal: Laterally stretches images. Auto: The standard setting is "Shrink". However, this automatically changes to "Zoom" with a letterbox picture. Shrink: Images appear in the center of the screen. Zoom: Expands to 4:3 aspect ratio. Just Fit Zoom (➜ page 13, Zoom) Manual Zoom Bit Rate Display (➜ page 13, Zoom) Motion pictures On ,------. Off GUI See-through GUI Brightness Off, On, Auto (Switches on automatically when the images appear on the display.) s3 to r3 HDMI Status Indicates various information when connected with HDMI AV OUT terminal. (➜ below, Confirming HDMI information) Quick OSD (➜ page 11) ∫ Other Menu To preset the settings You can preset your favorite video/audio effects onto "User1", "User2" and "User3". AV Enhancer Preparation Adjust the settings indicated below to your preference. (When "Auto" is selected, this is not available.) Audio settings: Night Sound Mode/H.Bass (➜ page 11) Advanced Surround/Multi Re-master (➜ page 12) Dialogue Enhancer/ (➜ page 17, Audio Menu) Sound Enhancement (➜ left) Video settings: Picture Mode (➜ page 17, Picture Menu) 1. Select "Save Settings" and press [ENTER]. 2. Press [34] to select the setting location (User1, User2 or User3) and press [ENTER]. 3. Follow the instructions on the menu screen and press [ENTER] last. To recall the settings (➜ page 11) Setup Play as DVD-Video or Play as DVD-Audio Play as DVD-VR Play as HighMAT or Play as Data Disc To confirm the settings 1. Press [34] to select "User1", "User2" or "User3" and press [ENTER]. 2. Select "Save Settings" and press [ENTER] twice. To exit the screen, select "No" and press [ENTER]. (➜ page 19, Changing the player settings) Select "Play as DVD-Video" to play [DVD-V] on DVD-Audio. Select "Play as Data Disc" to play [MP3] [JPEG] or [MPEG4] on DVD-RAM that contain both [DVD-VR] and another format (e.g. [JPEG]) or to play HighMAT discs without using the HighMAT function. Using On-Screen Menus ∫ Confirming HDMI information HDMI Status-----HDMI is connected. RQT8512 HDMI Information Audio Stream Max Channel Video Format Color Space 18 PCM/Dolby Digital/DTS 6ch 480p/720p/1080i YCbCr(4:4:4)/YCbCr(4:2:2)/RGB Connection status (➜ page 13, Changing soundtracks) Shows the maximum channel number of the connected equipment. (➜ page 17, Video Output Mode) (➜ page 17, HDMI Color Space) ≥All possible outputs are displayed. ≥The current output for "Audio Stream", "Video Format" and "Color Space" will be underlined. ≥When "Off" is selected in "Audio Output" (➜ page 20, "HDMI" tab) "- - -" will be displayed in "Audio Stream" and "Max Channel".