Panasonic DVD-S52S DVDS52 User Guide - Page 23
Picture incorrect, Progressive video, Sound incorrect, Video is
View all Panasonic DVD-S52S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Picture incorrect Picture distorted. ≥ Ensure that the unit is not connected through a video cassette recorder. (6) ≥ Have you selected an item in "Video Output Mode" (➜ page 17, Picture Menu) that is incompatible with the connected equipment? Depending on the current connection status, perform corresponding steps. ―When connecting to a television that is incompatible with progressive output using the COMPONENT VIDEO OUTPUT terminal: Press and hold [CANCEL] until the picture displays correctly. The settings will return to "480i". ―When connecting to a television with an HDMI cable: Press and hold [CANCEL] until the picture displays correctly. The settings will return to "480p". ―When connecting to an amplifier with an HDMI cable, and Progressive video There is ghosting when progressive output is on. ≥ This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output. Change "Video Output Mode" in Picture Menu to "480i". (17) When connecting with HDMI AV OUT terminal, connect with the other terminals and change the settings in the following order: 1. Select "Video Output"("HDMI" tab) to "Off". (20) 2. Select "Video Output Mode"(Picture Menu) to "480i". (17) Pictures not in ≥ If the unit is connected to the television through VIDEO OUT progressive output. or S VIDEO OUT, output will be interlace. Closed captions not displayed. ≥ When progressive output or HDMI output is on, closed captions will not be displayed. Troubleshooting guide Picture size doesn't fit the screen. to a television that is incompatible with progressive output using the COMPONENT VIDEO OUTPUT terminal: 1.Disconnect the HDMI (remove the cable/switch off the amplifier). 2.Press and hold [CANCEL] until the picture displays correctly. The settings will return to "480i". 3.Set "Video Output" to "Off" in the "HDMI" tab. (20) 4.Connect the HDMI (connect the cable/switch on the amplifier). ≥ Change "TV Aspect" in "Video" tab. (19) ≥ Use the television to change the aspect. If your television does not have that function, change "4:3 Aspect" in Display Menu. (18) ≥ Change the Zoom setting. (13) Sound incorrect Sound distorted. ≥ Select "Off" in "Advanced Surround". (12) ≥ Set "Attenuator" in Audio Menu to "On" if it causes distortion with AUDIO OUT connections. (18) ≥ Noise may occur when playing WMA files. ≥The disc may have restrictions on the method of audio output. With some multi-channel discs, unless the number of connected speakers is the same as the disc's channel specification, audio will not be output properly. Refer to the disc's jacket for more information. [DVD-A] ≥With HDMI AV OUT connections, audio may not be output from other terminals in the way that was set. ≥Match the speaker settings with the connected equipment. (20) The television may ≥PAL discs cannot be played. (You can play DVD-Audio; display incorrectly however, still pictures may be displayed enlarged.) or colors appear ≥Connect to a progressive output compatible television to enjoy Piercing noise comes from the speakers. ≥ If you have connected a digital amplifier which does not include decoder, be sure to select "PCM" in "Dolby Digital" or "DTS Digital Surround" in "Audio" tab. (20) faded. progressive video. ≥Picture may not be seen when more than 4 devices are connected with HDMI cables. Reduce the number of Effects do not work. ≥ None of the audio effects work when the unit is outputting bitstream signals from the DIGITAL AUDIO OUT or HDMI AV OUT terminal. (8) connected devices. ≥ Some audio effects do not work or have less effect with Menu not displayed ≥ Restore the zoom ratio to a1.00. (13) correctly. ≥ Set "Subtitle Position" in Display Menu to "0". (18) ≥ Set "4:3 Aspect" in Display Menu to "Normal". (18) some discs. ≥Night Sound Mode, H.Bass, Advanced Surround, Multi Re- master and Sound Enhancement do not work if you have Auto zoom function does not work well. ≥ Turn off TV's zoom function. ≥ Use the other preset aspect ratios or manual adjustment. (13) ≥ Zoom function may not work well, especially in dark scenes changed the play speed. ≥ With HDMI AV OUT connections, HDCD discs are played as normal CDs. and may not work depending on the type of disc. No sound ≥ There may be a pause in sound when you change the play RQT8512 Video is not ≥ Change the HDMI video output settings by using either of output from HDMI the procedures below. speed. ≥Audio may not be heard when more than 4 devices are AV OUT. - Connect the television using VIDEO OUT or S VIDEO OUT connected with HDMI cables. Reduce the number of terminal, then set "Video Output" to "On" in the "HDMI" tab. (20) connected devices. - Press and hold [CANCEL] until the picture is displayed. The settings will change to "On". 23