Panasonic DVD-S52S DVDS52 User Guide - Page 24

Recording, Unit displays, Television displays, While HDMI

Page 24 highlights

Troubleshooting guide Troubleshooting guide Recording Cannot record to digital recording equipment. (Incorrect sound recorded.) ≥ You cannot record WMA/MP3. ≥ You cannot record DVDs that have protection preventing digital recording. ≥ You cannot record DVDs if the recording equipment cannot handle signals with a sampling frequency of 48 kHz. ≥ Make the following settings: - Advanced Surround: Off (12) - PCM Digital Output: Up to 48 kHz (20) - Dolby Digital/DTS Digital Surround: PCM (20) Unit displays "noPLAy" "U11" "H∑∑"or"F7 stands for a number.) "nodISC" "U70-1" "U70-∑" (∑ stands for a number.) The actual number following "U70-" will depend on the state of this unit. ≥ You inserted a disc the unit cannot play; insert one it can. (4) ≥ You inserted a blank disc. ≥ You inserted a disc that has not been finalized. (4) ≥ The disc may be dirty. (25) ≥ Trouble may have occurred. The number following "H" and "F7" depends on the status of the unit. Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC power supply cord, and then reconnect it. ≥ If the service numbers fail to clear, note the service number and contact a qualified service person. ≥ You haven't inserted a disc: Insert one. ≥ You haven't inserted the disc correctly: Insert it correctly. (9) ≥The connected equipment is not HDMI compatible. ≥The HDMI connection acts unusually. - The connected equipment is not HDMI compatible. - The HDMI cable is too long. - The HDMI cable is damaged. Television displays "/" ≥ The operation is prohibited by the unit or disc. "Cannot play group ≥ You are trying to play incompatible group or content. (5) xx, content xx" "Cannot display group xx, content xx" "Group xx, content ≥ You are trying to play protected group or content. You cannot xx is protected" play it. "Cannot play audio" ≥ Audio has not been recorded, or recorded in a format this unit "No audio" cannot playback. Video playback only is possible. (5) "Check the disc" ≥ This disc may be dirty. (25) "Due to copyright protection, audio cannot be output from HDMI" ≥ Should you connect equipment that does not support CPPM (28), the audio from the CPPM copy protected DVD-Audio cannot be output from HDMI AV OUT terminal. Connect the audio cable of the Audio/Video cable (L, R) to a HDMI compatible AUDIO IN terminal. (7) While "HDMI Status" displayed, any items are not underlined ≥ If you select an item without an "¢" in the "Video Output Mode" in Picture Menu, it will not be underlined. (17) "This disc may not ≥ You can only play DVD-Video if their region number is "1", be played in your "ALL" or multiple region numbers including "1". (cover) region" No on-screen display. ≥ Select "On" in "On-Screen Messages" in "Display" tab. (20) RQT8512 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

24
RQT8512
Troubleshooting guide
Recording
Unit displays
Television displays
Cannot record to
digital recording
equipment.
(Incorrect sound
recorded.)
You cannot record WMA/MP3.
You cannot record DVDs that have protection preventing
digital recording.
You cannot record DVDs if the recording equipment cannot
handle signals with a sampling frequency of 48 kHz.
Make the following settings:
– Advanced Surround:
Off
(12)
– PCM Digital Output:
Up to 48 kHz
(20)
– Dolby Digital/DTS Digital Surround:
PCM
(20)
“noPLAy”
You inserted a disc the unit cannot play; insert one it can.
(4)
You inserted a blank disc.
You inserted a disc that has not been finalized.
(4)
“U11”
The disc may be dirty.
(25)
“H
∑∑
”or“F7
∑∑
(
∑∑
stands for a
number.)
Trouble may have occurred. The number following “H” and
“F7” depends on the status of the unit. Turn the unit off and
then back to ON. Alternatively, turn the unit off, disconnect
the AC power supply cord, and then reconnect it.
If the service numbers fail to clear, note the service number
and contact a qualified service person.
“nodISC”
You haven’t inserted a disc: Insert one.
You haven’t inserted the disc correctly: Insert it correctly.
(9)
“U70-1”
The connected equipment is not HDMI compatible.
“U70-
(
stands for a
number.)
The actual number
following “U70-” will
depend on the state
of this unit.
The HDMI connection acts unusually.
– The connected equipment is not HDMI compatible.
– The HDMI cable is too long.
– The HDMI cable is damaged.
/
The operation is prohibited by the unit or disc.
“Cannot play group
xx, content xx”
“Cannot display
group xx, content
xx”
You are trying to play incompatible group or content.
(5)
Group xx, content
xx is protected
You are trying to play protected group or content. You cannot
play it.
“Cannot play audio”
“No audio”
Audio has not been recorded, or recorded in a format this unit
cannot playback. Video playback only is possible.
(5)
“Check the disc”
This disc may be dirty.
(25)
“Due to copyright
protection, audio
cannot be output
from HDMI”
Should you connect equipment that does not support CPPM
(28)
, the audio from the CPPM copy protected DVD-Audio
cannot be output from HDMI AV OUT terminal. Connect the
audio cable of the Audio/Video cable (L, R) to a HDMI
compatible AUDIO IN terminal.
(7)
While “HDMI
Status” displayed,
any items are not
underlined
If you select an item without an “
¢
” in the “Video Output Mode”
in Picture Menu, it will not be underlined.
(17)
“This disc may not
be played in your
region”
You can only play DVD-Video if their region number is “1”,
“ALL” or multiple region numbers including “1”.
(cover)
No on-screen display.
Select “On” in “On-Screen Messages” in “Display” tab.
(20)
Troubleshooting guide