Panasonic EAH-A800 Owners Manual - Page 13

Preparation Connecting a Bluetooth® device Preparation • Place the Bluetooth® device within approx. 1 m (3.3 ft) from the unit. • Check the device operation using its operation instructions as required. • Using the "Technics Audio Connect" app (free of charge) makes connecting with Bluetooth® simple. Pairing procedure - When pairing your headphones first time with a Bluetooth® device 1 In the power-off state, press and hold [Í/l] of this unit for approx. 2 seconds until the LED indicator lights for 1 second. • The LED indicator will light alternately in blue and red. Note: The LED indicator lights (Red/blue) to indicate that the unit is in pairing mode. 2 Turn on the power of the Bluetooth® device, and enable the Bluetooth® function. 3 Select "EAH-A800" from the Bluetooth® device's menu. e.g. • A BD address (Bluetooth® Device address: an alphanumeric character string that is displayed by and unique to the device) may be displayed before "EAH-A800" is displayed. • If prompted for a passkey, input the passkey "0000 (four zeros)" of this Bluetooth Bluetooth ON unit. Device • When the LED indicator blinks (blue)* twice at approximately 2 second EAH-A800 intervals, pairing has been completed and connection has been established. * The battery is low when it is blinking in red. 4 Confirm that this unit and the Bluetooth® device are connected. Select Note • If the connection with the device does not complete within 5 minutes, the pairing mode on this unit cancels and they transition to connection standby mode. Perform pairing again. • This unit remembers the device lastly connected. The unit may connect automatically after turning on the power of this unit. 13