Panasonic EP1060 EP1060 User Guide - Page 15

• When the Shoulder Position Indicator is flashing, adjust the position of the massage heads (upper roller) so that they lightly touch the shoulder. • The shoulder position can be adjusted up and down 4in. (10cm). • When it is not possible to correctly adjust the shoulder position, slide your body down and try adjusting it again. 4. Selecting an Area for Concentrated Massage • Please see Page 21-23 for details regarding the programs. Too high Correct position • Lightly touching the shoulder. Too low Massaging the Neck and Shoulders • Press this button to focus the program on the neck and shoulders. (The upper and lower back will also be neck, shoulder lower back massaged slightly.) • Press the button again to toggle off. Press Massaging the Lower Back • Press this button to focus the program on the lower back. (The neck and shoulders will also be neck, shoulder lower back massaged slightly.) • Press the button again to toggle off. Press 5. Removing Vibration and Tapping from Programs Removing Vibration from Programmed Operation Removing Tapping from Programmed Operation • Press this button to remove vibration in programmed • Press this button to remove tapping in operation. (The vibration will change to a kneading programmed operation. (The tapping will change massage.) * Press the button again to restore vibration to the vibration on/off tap on/off to a kneading massage.) * Press the button again to restore vibration on/off tapping to the tap on/off program. Press program. Press • For Tapping B, and Vibration, unless the massage heads are actually touching the body then you may not feel anything. 6. Adjusting Massage Intensity Increasing massage intensity • Massage intensity can be adjusted up to 3 levels. • When the massage heads reach their limit you will hear a "peep, intensity peep, peep" sound. Decreasing massage intensity intensity Press Press 7. Auto Stop in Programmed Operation When the selected program has been completed, the unit will automatically come to a stop. (Although programmed operation lasts for approximately 15 minutes (12-17 minutes), this will vary according to the shoulder position and program selected, whether or not tapping is on or off, and the weight of the person using the unit.) • The massage heads will move to the retracted position and stop. • The ON/OFF lamp will flash until the heads have stopped moving. • If you want to start another massage, please press button. • Please rest at least 10 minutes between massages. 8. Stopping Programmed Operation Press button to stop programmed operation. • The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position. 9. Stopping the Massage Immediately Press button to stop programmed operation immediately. • All movement will stop immediately. • The massage heads will not return to the retracted position, which may make sitting in the seat somewhat uncomfortable. • Please press button twice in order to return the massage heads to the retracted position. 15