Panasonic EP790 EP790 User Guide - Page 8

TURNING ON THE POWER, The massage heads should be spread apart near the top

Page 8 highlights

TURNING ON THE POWER First read, and familiarize yourself with, the safety precautions. Plug the power cord into the inlet located at the rear of the chair. Plug the power cord into an AC outlet. Be careful not to pinch the cord under the leg frames of the chair or any other items. Power switch Controller on off Controller storage pocket Power plug Operating lock switch NOTE: The operating lock switch prevents the unit from being turned "on" when switch is in the "lock" position. Power switch on off 1. Using a flat screwdriver or similar object, insert into the lock switch and turn to "open". 2. Move the power switch to "on". When the operating lock switch is pointing toward "lock", the power switch cannot be moved to the "on" position. After each use. Be sure to turn the power switch to "off". To prevent children from using this unit, safety lock the power switch by moving the operating on lock switch to the "lock" position. As a further caution, unplug the power cord from the outlet after each use. off BEFORE SITTING DOWN After checking the positions of the massage heads with your hands, sit down slowly in the center of the Massage Lounger. The massage heads should be spread apart near the top of the Massage Lounger backrest (home position). If the massage heads are not in the position described above, do not sit down in the Massage Lounger. Press the "start/reset" button on the control panel twice. Wait for the massage heads to reach the home position before sitting down. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

on
off
TURNING ON THE POWER
First read, and familiarize yourself with, the safety precautions.
BEFORE SITTING DOWN
After checking the positions of the massage heads with your
hands, sit down slowly in the center of the Massage Lounger.
Power switch
Power plug
Controller
Controller
storage pocket
1. Using a flat screwdriver or similar object, insert
into the lock
switch and turn to “open”.
8
on
off
Operating lock switch
NOTE:
Power switch
Plug the power cord into the inlet located at the rear of the chair.
Plug the power cord into an AC outlet.
Be careful not to pinch the cord under the leg frames of the chair or any other items.
The operating lock
switch prevents the
unit from being
turned “on” when
switch is in the “lock”
position.
2. Move the power switch to “on”.
When the operating lock switch is pointing toward “lock”,
the power switch cannot be moved to the “on”
position.
After each use.
Be sure to turn the power switch to “off”.
To prevent children from using this unit, safety
lock the power switch by moving the operating
lock switch to the “lock” position.
As a further caution, unplug the power cord from
the outlet after each use.
The massage heads should be spread apart near the top of
the Massage Lounger backrest (home position).
If the massage heads are not in the position described above,
do not sit down in the Massage Lounger. Press the “start/reset”
button on the control panel twice. Wait for the massage
heads to reach the home position before sitting down.