Panasonic ES-LA93 Operating Instructions Multi-lingual - Page 11

English Replacing the inner blades 1. Press the foil frame release buttons and lift the outer foil section upwards as illustrated. 2. Remove the inner blades one at a time as illustrated. • Do not touch the edges (metal parts) of the inner blades to prevent injury to 23 your hand. 3. Insert the inner blades one at a time until they click as illustrated. Cleaning the self-cleaning recharger Beard trimmings may become attached to the cleaning tray of the self-cleaning recharger. Follow the steps below to remove them. We recommend doing this each time you change the detergent cartridge. 1. Be sure to remove the water tank and the appliance plug from the self-cleaning recharger. • Be careful not to spill the cleaning liquid. 2. Gently wipe off any beard trimmings attached to the 2 inside of the cleaning tray with a cloth or tissue paper dampened with water. • Clean the corners and uneven parts of the cleaning tray with a cotton swab dampened with water. • Do not pull hard on the rubber blade protector at the bottom of the cleaning tray. The rubber may come off if you pull hard on it. It is only necessary to pull it up slightly. • Warning - Do not wash or apply water to the adaptor or selfcleaning recharger. Failure to observe this may cause electric shock or result in short circuits. 11