Panasonic ES-LT5N-H ES-LT5N - Operating Instructions - Page 10

Charging the shaver

Page 10 highlights

English ►►Unlocking the power switch 1. Press the power switch for more than 2 seconds. 2. Once the shaver starts operating, release the power switch. The switch lock lamp will blink. The switch lock lamp will turn off. ••The power switch cannot be unlocked while charging. ►►Checking the power switch is locked Press the power switch while it is locked. Charging the shaver 1 Insert the appliance plug into the shaver. ••Turn the shaver off before inserting. 2 2 Plug in the adaptor into a household outlet. ••Wipe off any water droplets on the appliance socket. 1 ••Check that the charge status lamp ( ) glows. ••Charging is completed after approx. 1 hour. The charging time may differ with the charging capacity. •• Charging the appliance after each use will not affect the battery life. 3 Disconnect the adaptor after charging is completed. ••Charging the battery for more than 1 hour will not affect battery performance. ••If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration. Note You cannot operate the shaver while charging. The switch lock lamp will blink and then turn off after 5 seconds. ••You can also check this by unplugging the AC adaptor while charging. 10 ES-LT5N_3N_US.indb 10 2015/04/17 17:38:33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

10
English
Unlocking the power switch
1. Press the power switch for
more than 2 seconds.
2. Once the shaver starts
operating, release the power
switch.
The switch lock lamp will blink.
The switch lock lamp will turn
off.
The power switch cannot be unlocked while charging.
Checking the power switch is locked
Press the power switch while it is locked.
The switch lock lamp will blink and then turn off after 5 seconds.
You can also check this by unplugging the AC adaptor while
charging.
Charging the shaver
1
1
Insert the appliance plug into
the shaver.
Turn the shaver off before inserting.
2
2
Plug in the adaptor into a
household outlet.
Wipe off any water droplets on the
appliance socket.
Check that the charge status lamp (
)
glows.
1
2
Charging is completed after approx. 1 hour.
The charging time may differ with the charging capacity.
Charging the appliance after each use will not affect the battery life.
3
3
Disconnect the adaptor after charging is completed.
Charging the battery for more than 1 hour will not affect
battery performance.
If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
Note
You cannot operate the shaver while charging.
ES-LT5N_3N_US.indb
10
2015/04/17
17:38:33