Panasonic ES-LT5N-H ES-LT5N - Operating Instructions - Page 14
Cleaning the shaver
View all Panasonic ES-LT5N-H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English Cleaning the shaver Do not use kitchen, bathroom, or toilet detergents. Also, do not wipe with thinners, benzine, alcohol etc. Doing so may result in malfunction. 1. Turn the power switch OFF, and disconnect the AC adaptor. ••Unlock the switch lock. 2. Apply some hand soap and some water to the system outer foil. 3. Press the power switch for more than 2 seconds to activate the sonic vibration cleaning mode. ••The battery capacity lamps blink in order. ••After about 20 seconds, it will be automatically turned off. 4. Remove the outer foil section and press the power switch for more than 2 seconds to activate the sonic vibration cleaning mode. 5. Clean the shaver, the outer foil section, and the trimmer with running water. ••After rinsing with water, shake the shaver up and down for a few times to remove excess moisture. Hitting the vanity, etc., while shaking the shaver may cause malfunction. ••Splashing is reduced by rinsing the shaver in sonic vibration cleaning mode. 6. Wipe off any drops of water with a dry cloth. 7. Dry the outer foil section, the shaver, and the trimmer completely. 8. Attach the outer foil section to the shaver. Replacing the system outer foil and the inner blades system outer foil inner blades once every year once every two years ►►Removing the outer foil section Press the foil frame release buttons and lift the outer foil section upwards. ►►Attaching the outer foil section After turning the foil frame mark ( ) to the front, securely attach the outer foil section to the shaver until it clicks. 14 ES-LT5N_3N_US.indb 14 2015/04/17 17:38:34