Panasonic ES-LT5N-H ES-LT5N - Operating Instructions - Page 15

English ►►Replacing the system outer foil 1. Press the system outer foil release buttons and pull down the system outer foil. 2. Align the foil frame mark ( ) and the system outer foil mark ( ) and securely attach together until it clicks. ••The system outer foil cannot be reversely attached. ••Always insert the system outer foil to the foil frame when attaching to the shaver. ••Do not press the system outer foil release buttons with excessive force. Doing so may bend the system outer foil, preventing complete attachment to the foil frame. ►►Replacing the inner blades 1. Remove the inner blades one at a time. 2. Insert the inner blades one at a time. ►►Replacement parts Replacement parts are available at your dealer or Service Center. Replacement parts for ES‑LT5N/ES‑LT3N System outer foil and inner blades WES9015 System outer foil WES9089 Inner blades WES9068 Troubleshooting Perform the following actions. If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair. Problem The power switch does not turn ON. Shavings fly out in all directions. System outer foil gets hot. Operating time is short even after charging. The odor is getting stronger. The driving sound changes while shaving. Action Unlock the switch lock. (See pages 9 and 10.) This can be improved by cleaning every time after shaving. Replace the system outer foil if it is damaged or deformed. (See this page.) When the number of operations per charge starts to decrease, the battery is nearing the end of its life. This can be improved by cleaning every time after shaving. While the shaving sensor lamp glows, the shaving sensor is operating. The sound changes depending on the beard thickness. ES-LT5N_3N_US.indb 15 15 2015/04/17 17:38:35