Panasonic EY4542 EY4542 User Guide - Page 20

XI. ACCESSORIES WARNING • The use of any accessories not specified in this manual may result in fire, electric shock, or personal injury. Use recommended accessories only. • Use of a blade on material that is thicker or thinner than that recommended for that blade will result in a rough cut, and could increase the risk of "kickback" or other injury. Carbide-tipped Blade for Metal • EY9PM13C For cutting unhardened ferrous material Thickness of material 0.5 mm - 6.0 mm (1/32"-1/4") Carbide-tipped Blade for Thin Metal (Optional accessory) • EY9PM13D For cutting unhardened thin ferrous thin material that clean cutting edge required Thickness of material 0.5 mm - 6.0 mm (1/32"-1/4") Carbide-tipped Blade for Wood (Optional accessory) • EY9PW13A For cutting wood in general Carbide-tipped Blade for Thin Wood (Optional accessory) • EY9PW13B For cutting thin wood that clean cutting edge required Recommended thickness of material up to 12 mm Carbide-tipped Blade for Plastic (Optional accessory) • EY9PP13B For cutting plastic Recomneded thickness of material acrylic and vinyl chloride plates: 2.0 mm - 5.0 mm (5/64" - 3/16") corrugated pates, pipes 0.8 mm - 5.0 mm (1/32" - 3/16") Vacuum hose adaptor (Optional accessory) • EY9X012E Rip Fence (Optional accessory) • EY3500B7727 For convenience of rip cuts and repeated cut of uniform width XII. SPECIFICATIONS Motor voltage Blade speed Blade size Outside diameter Arbor size Maximum cutting depth Overall length Weight (with battery pack: EY9L40) BATTERY PACK Model Storage battery Battery voltage Capacity 14.4 V DC 3600 min-1 (rpm) 135 mm (5-3/8") 20 mm (25/32") 0 - 46 mm (0" - 1-13/16") (φ135 mm blade) 329 mm (12-61/64") 2.65 kg (5.7 lbs) EY9L40 Li-ion Battery 14.4 V DC (3.6 V x 4 cells) 3 Ah - 20 -