Panasonic EY6950 EY6950 User Guide - Page 10

. LAMP INDICATIONS Red Flashing Red Lit Flashing quickly Orange Lit Orange Flashing Charger is plugged into a wall outlet. Ready to charge. Now charging Charging is completed. Battery pack is warm. Charging will begin when temperature of battery pack drops. Charging is not possible. Clogged with dust or malfunction of the battery pack. . MAINTENANCE Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning. BATTERY RECYCLING ATTENTION: A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. . ACCESSORIES Use only bits suitable for size of drill's chuck. RECOMMENDED SPEED SELECTION CAUTION: USE AT LOW SPEED WHEN STRONG FORCE IS NEEDED DURING OPERATION. (Using at high speed while a strong force is applied may cause a motor breakdown.) Use the following as a guide to select low or high speed for the job. EY6950 MATERIAL/ MORTAR / CONDITION BRICK DRILLING WOOD / YELLOW PINE Thickness: 40 mm (1-37/64") or less METAL METAL HOLE SAW Cold-rolled steel plate (SPC) Thickness: 1.6 mm (1/16") or less SCREW TIGHTENING Wood screws HIGH ø 10 mm (3/8") or less Not used ø 6.5 mm (1/4") or less Not used ø 4 mm (5/32") or less LOW ø 13 mm (1/2") or less (Slow operation) ø 36 mm (1-27/64") or less ø 13 mm (1/2") ø 34 mm (1-11/ 32") ø 6.8 mm (17/64") or less or less or less - 10 -