Panasonic EY6950 EY6950 User Guide - Page 6

.FUNCTIONAL DESCRIPTION Keyless drill chuck Clutch handle Speed selector switch Vent holes Forward/ Reverse lever Variable speed control trigger Battery pack release button 18V Battery pack (EY9251) Battery charger (EY0110) Support handle . ASSEMBLY Attaching or removing bit Note: When attaching or removing a bit, disconnect battery pack from tool or place the switch in the center position (switch lock). This tool is equipped with a keyless drill chuck. 1. Attachment Insert the bit and turn the Lock collar clockwise (looking from the front) to tighten firmly until it stops clicking. Lock collar Lock collar Note: If excessive play occurs in the chuck, secure the drill in place and tighten the chuck by turning clockwise, open the chuck jaws by unscrewing the Lock collar and tighten the screw (left-handed screw) with a screwdriver by turning it counterclockwise (viewed from the front). 2. Removal Slide the Lock collar to FREE side. Turn the Lock collar counterclockwise (looking from the front), then remove the bit. - 6 -