Panasonic EY6950 EY6950 User Guide - Page 4

For Battery Charger & Battery Pack Important Safety Instructions - drill

Page 4 highlights

8) During charging, the charger may become slightly warm. This is normal. Do not charge the battery for a long period. Symbol meaning V Volts Direct Current n0 no load speed .../min revolutions or reciprocation per minutes Forward Rotation Reverse Rotation Rotation with Hammering Rotation only WARNING; Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: * Lead from lead-based paints * Crystalline silica from bricks and cement and other masonry products * Arsenic and chromium from chemically-treated lumber. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter our microscopic particles. .FOR BATTERY CHARGER & BATTERY PACK IMPORTANT SAFETY INSTRUCTIONS 1) SAVE THESE INSTRUCTIONS-This manual contains important important safety and operating instructions for battery charger EY0110. 2) Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack. CAUTION 3) -To reduce the risk of injury, charge only Battery Pack shown below. EY9065, EY9066, EY9168, EY9080, EY9086, EY9180, EY9182, EY9001, EY9006, EY9101, EY9106, EY9200, EY9201, EY9136, EY9230, EY9231 EY9251, EY9117, EY9210, EY9231 Other types of batteries may burst causing personal injury and damage. 4) Do not expose charger to rain or snow. 5) To reduce risk of damaging the electric plug and cord, pull by plug rather than cord when disconnecting charger. 6) Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. 7) An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. that pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. that extension cord is properly wired and in good electrical condition. c. that wire size is large enough for ampere rating of charger as specified below. - 4 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

-
4
-
8)
During charging, the charger may
become slightly warm. This is nor-
mal. Do not charge the battery for a
long period.
Symbol
meaning
V
Volts
Direct Current
n
0
no load speed
…/min
revolutions or
reciprocation per minutes
Forward Rotation
Reverse Rotation
Rotation with Hammering
Rotation only
WARNING;
Some dust created by power sand-
ing, sawing, grinding, drilling, and
other construction activities con-
tains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals
are:
* Lead from lead-based paints
* Crystalline silica from bricks and
cement and other masonry prod-
ucts
* Arsenic and chromium from chemi-
cally-treated lumber.
To reduce your exposure to these
chemicals: work in a well ventilated
area, and work with approved safety
equipment, such as dust masks that
are specially designed to filter our
microscopic particles.
.
FOR
BATTERY CHARGER
& BATTERY PACK
IMPORTANT SAFETY
INSTRUCTIONS
1)
SAVE THESE INSTRUC-
TIONS
-
This
manual
contains
important
important
safety and operating instruc-
tions for battery charger EY0110.
2) Before using battery charger, read all
instructions and cautionary markings
on (1) battery charger, (2) battery pack.
3)
CAUTION
-To reduce the risk
of injury, charge only Battery Pack
shown below.
EY9065, EY9066, EY9168, EY9080,
EY9086, EY9180, EY9182, EY9001,
EY9006, EY9101, EY9106, EY9200,
EY9201, EY9136, EY9230, EY9231
EY9251, EY9117, EY9210, EY9231
Other types of batteries may burst
causing personal injury and damage.
4) Do not expose charger to rain or snow.
5) To reduce risk of damaging the electric
plug and cord, pull by plug rather than
cord when disconnecting charger.
6) Make sure cord is located so that it
will not be stepped on, tripped over,
or otherwise subjected to damage or
stress.
7) An extension cord should not be used
unless absolutely necessary.
Use of improper extension cord could
result in a risk of fire and electric
shock. If extension cord must be
used, make sure:
a. that pins on plug of extension
cord are the same number, size
and shape as those of plug on
charger.
b. that extension cord is prop-
erly wired and in good electrical
condition.
c. that wire size is large enough
for ampere rating of charger as
specified below.