Panasonic HC-W580K Advanced Operating Manual - Page 164
Touch the desired Network Authentication method., Touch the desired Encryption method., Touch [INPUT]
View all Panasonic HC-W580K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
7 Touch the desired Network Authentication method. Network authentication type [Open] [WEP] [WPA-PSK]/[WPA2-PSK] Encryption types that can be set [NONE]/[WEP] There is no setup of an encryption types. [TKIP]/[AES] ≥ When [WEP] is selected, proceed according to step 9. 8 Touch the desired Encryption method. ≥ If you select [NONE], a message is displayed after completing the connection. Touch [ENTER], and exit [Wireless Settings]. 9 (When selecting [WEP]/[TKIP]/[AES]) Touch [INPUT], then enter the Password. ≥ For details on how to enter characters, refer to page 95. ≥ When the entry is complete, touch [Enter]. ≥ A message is displayed when the connection is complete. Touch [ENTER], and exit [Wireless Settings]. Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen ≥ Check the wireless access points instruction manual and settings when a saving wireless access point. ≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We recommend you connect with the strongest possible Encryption method. ≥ When the signal of the wireless access point is weak, a connection may not be established. Refer to "Messages" (l 214) and "Troubleshooting" (l 216) for details. ≥ Transmission speed may decrease, or may not be usable depending on the environment it is used in. Setting up a connection manually - 164 -