Panasonic HC-W580K Advanced Operating Manual - Page 233
Registering positions to the position buttons
View all Panasonic HC-W580K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
3 Press the recording start/stop button. (When [Party Scene]/[Moving Object] is selected) ≥ Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It takes time until recording starts. ≥ The Remote Pan Tilt Cradle operates within the range set in advance. (When [Manual]/[Preset Positions] is selected) ≥ Performing the operation of Step 2 during recording may cause the recording screen to shake or the Remote Pan Tilt Cradle to move from its original location. To switch the Remote Pan Tilt Cradle Mode Touch . ≥ The selection screen of the Remote Pan Tilt Cradle Mode is displayed. Touch the desired mode. To exit the Remote Pan Tilt Cradle Touch [EXIT]. ≥ The Remote Pan Tilt Cradle rotates and returns to its home position. ≥ After the operation, the Remote Pan Tilt Cradle turns off. Before removing this unit, disconnect the USB cable. Setting up [Preset Positions] ∫ Registering positions to the position buttons 1 Touch . 2 Touch the position button to which you want to register a position. ≥ You can register positions to [POS1]/[POS2]/[POS3]/[POS4]/[POS5] ≥ The position buttons without a registered position are indicated as [Not set]. 3 Determine a position with / / / ≥ You can also operate the zoom with the zoom lever. 4 Touch [ENTER]. ≥ To register positions to other position buttons, repeat Steps 2-4. ≥ To adjust a position that has already been registered to a position button, touch the position button to which the position you want to adjust is registered, and follow Steps 3-4. ∫ Moving the Remote Pan Tilt Cradle to a registered position 1 Touch P O S . ≥ Check that is highlighted in yellow. POS ≥ The position buttons ([POS1]/[POS2]/[POS3]/[POS4]/[POS5]/[HOME]) will be displayed. These buttons will disappear when no touch operation is performed for approximately 5 seconds. To display them again, touch the screen. 2 Touch the desired position button. ≥ The Remote Pan Tilt Cradle will move to the registered position of the selected position button. ≥ You cannot select position buttons without a registered position. ≥ If you touch [CANCEL], the Remote Pan Tilt Cradle will stop in a midway position. ≥ To return to the home position, touch [HOME]. - 233 -