Panasonic HPX300 Operating Instructions - Page 139
Connecting to External Devices, Functionality Provided by Connections to USB 2.0 Connector
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Chapter 8 Connecting to External Devices Chapter 8 Connecting to External Devices Functionality Provided by Connections to USB 2.0 Connector Connecting to a computer in USB device mode A USB 2.0 connection to a computer or other device allows you to use P2 cards in the camera as mass storage. Procedures for making connections to a computer 1 Connect a USB cable to the USB 2.0 connector. NOTE • A USB 2.0 cable is not supplied with the AG-HPX300P. Use a commercially available USB cable (with shielding or other noise-reduction measures) that supports USB 2.0. • The camera supports USB cable lengths up to 5 meters. However, we recommend use of a USB cable shorter than 3 meters. NOTE You can use the menu option USER MAIN/USER1/ USER2 in the SW MODE screen to assign PC MODE settings to a user button. Note that the USER button functions are not available when the menu is open. To make a USB connection, you must first install the P2 software on the supplied CD-ROM on the computer. Select the "AG-HPX300" driver. This USB driver supports only the Windows operating system. For details, refer to the installation manual. NOTE • A USB driver must be installed on the computer. • Use a computer that supports USB 2.0 since the camera supports only USB 2.0. • Connect only one camera to a computer via USB. • Do not remove P2 cards when the camera is connect to a computer via USB. • In a USB connection, the P2 CARD ACCESS LED is on only when the card is accessed. • In USB device operation, recording, playback and clip thumbnail operations are not available. • When a USB device is running, the remaining capacity of P2 cards is not indicated. Audio is not output through the SDI OUT or DVCPRO/DV connector and the AUDIO level meters do not appear. • The USB lamp on the camera lights during USB connection and USB DEVICE CONNECT appears in the center of the viewfinder. If a normal connection cannot be established, the USB lamp blinks and DISCONNECT appears in the viewfinder. USB LED USB 2.0 Connector (DEVICE) 2 Set the menu option PC MODE SELECT in the SYSTEM SETUP screen to USB DEVICE and set PC MODE to ON. For details on menu operation, refer to [Using the menus] (page 120). SYSTEM SETUP SYSTEM MODE REC SIGNAL REC FORMAT CAMERA MODE SCAN REVERSE ASPECT CONV SETUP PC MODE SELECT 1080-59.94i CAMERA AVC-I100/60i 60i OFF SIDE CROP 0% USB DEVICE PUSH MENU TO EXIT (Viewfinder display) USB DEVICE CONNECT 139