Panasonic HPX300 Operating Instructions - Page 16
Audio (input) Function AUDIO IN CH1/CH2 audio channel 1/2 connectors
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Audio (input) Function Section 7 28 6 Chapter 2 Parts and their Functions 1 4 35 1 MIC IN (microphone input) jack (XLR, 3-pin) • Connect a microphone (optional accessory) to this jack. • A phantom-powered microphone may be connected. To use a phantom-powered microphone, set the menu option F.MIC POWER to ON in the AUDIO SETUP screen. For details, refer to [Preparing for Audio Input] (page 95). 2 AUDIO LEVEL CH1/CH2 (audio channel 1/2 recording level adjustment) controls • With the AUDIO SELECT CH1/CH2 switch positioned to MAN, these controls can be used to adjust the recording levels for audio channels 1 and 2. • Note that the controls are designed to be locked. For adjustment, each control must be depressed while turning. 3 AUDIO SELECT CH1/CH2 (audio channel 1/2 automatic/manual level adjustment selector) switch Use this switch to select recording level control mode for Audio Channels 1 and 2. AUTO: Recording level automatically controlled. MAN: Recording level manually controlled. For details, refer to [Adjusting Recording Levels] (page 54) 4 AUDIO IN (audio input selector) switch Use this switch to select signals recorded through audio channels 1 - 4. FRONT: Records signals from a microphone connected to the MIC IN jack. W.L.(WIRELESS): Records signals from a wireless receiver. REAR: Records signals from audio devices or microphones connected to the AUDIO IN CH1/CH2 connectors. NOTE To record 2-channel wireless input, switch both CH1 and CH2 to W.L. position and set the menu option WIRELESS TYPE in the AUDIO SETUP screen to DUAL. 5 AUDIO IN CH1/CH2 (audio channel 1/2) connectors (XLR, 3-pin) Audio devices or microphones may be connected here. For details, refer to [When Using Audio Devices] (page 96). 6 LINE/MIC/+48V (line input/mic input/mic input +48V) selector switch Use to select audio signals input to the AUDIO IN CH1/ CH2 connectors. LINE: Line input for audio signals input from an audio device MIC: Audio signal input from microphone with internal power supply (the camera does not supply power to a phantom microphone). + 48V: Audio signal input from a microphone that requires an external power supply (The camera supplies power to a phantom microphone). NOTE Power is supplied when the menu option R.MICPOWER in the AUDIO SETUP screen is set to ON. 7 FRONT AUDIO LEVEL (audio recording level adjustment) control • This control adjusts the recording level of audio channels 1 and 2. • With the AUDIO SELECT CH1/CH2 switch positioned to MAN, this control can be used to adjust the recording levels for audio channels 1 and 2. • Use the menu options FRONT VR CH1 and FRONT VR CH2 in the AUDIO SETUP screen to select the input connector this control will be used for. 8 Wireless slot A Unislot wireless receiver (optional accessory) may be attached here. 16