Panasonic KV-S1026C Operating Instructions - Page 30
Operation, Preparing Documents, Acceptable Documents, Acceptable cards
View all Panasonic KV-S1026C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Operation O p e r Preparing Documents a t i Acceptable Documents o n The acceptable documents for this scanner are as follows. Document size: 48-216 mm (1.9-8.5 in.) 70-2,540 mm (2.8-100 in.) Paper thickness for Feeding: KV-S1026C: 20-209 g/m² KV-S1015C: 40-209 g/m² • The height of all the documents on the tray should be less than 5 mm. This compares to 50 sheets (80 g/m² or 20 lb.) of new paper. • With the exception of ISO format cards, the minimum guaranteed feeding length is 70 mm (2.8 in.). • Single paper feeding is recommended for papers exceeding the legal size length. Recommended paper: Plain paper Acceptable cards ISO format card: Size: 85.6 x 54 mm (3.4 x 2.1 in.) Thickness: 0.76 mm (0.03 in.) Embossed card is also acceptable. • A maximum of 3 cards can be loaded on the feed tray. The height of the total cards (the total thickness including the embossing on each card) should be less than 5 mm (0.2 in.). Additionally, the embossing on each card must not get entangled with others. • Use the landscape orientation when scanning an embossed card. If the scanning fails, place the card upside down, and then try again. • Use the mixed batch card guide (page 37) when scanning mixed media (cards and papers) at the same time. 30 Operating Manual