Panasonic KV-S1026C Operating Instructions - Page 57
Symptom, Possible Cause, Remedy, Scanned image is skewed.
View all Panasonic KV-S1026C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Appendix Symptom Possible Cause Remedy The rollers are dirty. Clean the rollers. (page 44) The paper feed roller, or double feed prevention roller have become worn down. Replace the paper feed roller or double feed prevention roller. (page 51) Right and left sides of the document to be scanned are not the same in height, because of curling or folding. Flatten the document (page 33) and load it again after reducing the pages. Double feeding occurs frequently or the scanner stops loading while scanning. The document is printed on an unsupported type of paper or thick paper. Make a copy of the document on paper of an acceptable type and thickness (page 30), and scan the copy. The length of the paper is too short. Make a copy of the document on paper of an acceptable size (page 30), and scan the copy. The document is not aligned correctly. Realign the document. (page 33) The document set on the feed tray has too many pages. Remove pages from the document until it is under the limit mark on the document guides. The document is wrinkled. Smooth out the document. The rollers are dirty. Clean the rollers. (page 44) Paper jams occur frequently. The document is not aligned correctly. Realign the document. (page 33) The document set on the feed tray has too many pages. Remove pages from the document until it is under the limit mark on the document guides. Scanned image is skewed. The document guides are not adjusted to the size of the document to be scanned, or the document to be scanned is set slanted on the feed tray. Adjust the document guides properly to the size of the document to be scanned. (page 33) Right and left sides of the document to be scanned are not the same in height, because of curling or folding. Flatten the document (page 31) and load it again after reducing the pages. The scanned document is blank. The document to be scanned was loaded upside down. Load the document correctly. (page 33) Vertical lines appear on the scanned document. The scanning glass is dirty. Clean the scanning glass. (page 48) The scanning density is uneven. The scanning glass is dirty. Clean the scanning glass. (page 48) Operating Manual 57