Panasonic KX-DT343-B Digital Proprietary Telephone - Page 17

Wall Mounting 1. Remove the wall mounting adaptor from the unit as shown. 2. Set the operation board to level 1, then connect and secure the telephone line cords. • The cords can also be run from the top of the unit (page 13). 3. Attach the wall mounting adaptor as shown. • Make sure the cords are not pinched by the wall mounting adaptor. When running the cords from the top of the unit, look through the opening in the wall mounting adaptor (A) to confirm that the cords are not being pinched. Wall Mounting Slide the wall mounting adaptor up to this point. 4. Drive the 2 screws (included) into the wall either 83 mm (3-1/4 in) or 100 mm (3-15/16 in) apart, and mount the unit on the wall. • You can find a wall mounting 83 mm (3-1/4 in) 100 mm template on page 23. (3-15/16 in) • Make sure that the wall that the unit will be attached to is strong enough to support the unit (approx. 1.65 kg [3.64 lb]). • Make sure the cords are securely fastened to the wall. • When this unit is no longer in use, make sure to detach it from the wall. Washer Drive the screw to this point. • For information on locking the handset hook, refer to page 12. Document Version 2009-03 17