Panasonic KX-FP151 KX-FP151 Owner's Manual (English) - Page 56
HELP, ERROR MESSAGES, Reports
View all Panasonic KX-FP151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Error Messages Reports! If your unit cannot send a fax, check the following: -the number you dialed is correct, -the other party's machine is a facsimile. If the problem remains, correct it by following the communication message printed on the sending and journal reports (p. 31). Communication message Error code Cause & solution COMMUNICATION ERROR 40-42 46-52 58, 65 68, 72 FF qA transmission or reception error occurred. Try again or check with the other party. 43 qA line problem occurred. Connect the telephone 44 line cord to a different jack and try again. qAn overseas transmission error occurred. Try using the overseas mode of feature #23 (p. 52). DOCUMENT JAMMED - qThe document is jammed. Remove the jammed document (p. 66). ERROR-NOT YOUR UNIT 54 qA transmission or reception error occurred because 59 of a problem with the other party's fax machine. 70 Check with the other party. MEMORY FULL - qThe document was not received due to memory being full. NO DOCUMENT - qThe document was not fed into the unit properly. Reinsert the document and try again. OTHER FAX NOT RESPOND - qThe other party's fax machine is busy or has run out of recording paper. Try again. qThe document was not fed properly. Reinsert the document and try again. qThe other party's fax machine rings too many times. Send the fax manually - dial the number, confirm the fax tone, and press FAX/START . qThe other party's machine is not a facsimile. Check with the other party. qThe number you dialed is not in service. PRESSED THE STOP KEY - q STOP was pressed and fax communication was canceled. OK - qFax communication was successful. 56 For fax advantage assistance, call 1-800-435-7329.