Panasonic KX-HCM8 Network Camera - Page 47
Description, Go to Top Network, Name/Time, Security, Administrator, Security, General User,
UPC - 037988701995
View all Panasonic KX-HCM8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Operating Instructions Item (1) Go to Top Page (2) Network (3) Name/Time (4) Security: Administrator (5) Security: General User (6) Top View Image (7) Image Transfer (8) Camera Setup (9) Multi-Camera Description Links to Top Page. You can access Single/MultiCamera screen in Motion JPEG/JPEG - Regularly Refresh. Refer to page 49. Configures the network setting (Static/DHCP, Default Gateway, Port Number, DNS, DDNS and Bandwidth). Refer to page 50. Sets the Camera Name on the Single Camera screen. Date and Time is used in the Alarm/Timer mode in the Image Transfer feature and On the Air time setting on Top View Image Setting window. NTP automatically adjusts the internal clock of Network Camera. Refer to page 54. Sets administrator ID and password. Authentication window can be enabled. Administrator should control Network Camera. Refer to page 56. Sets general user ID and password. General user is the registered user. Refer to page 58. Sets the initial language, Title, Image URL, Link URL, the image resolution, image quality, refresh interval and the Limit time of Continuous Motion and On the Air time. Top View Image screen consists of Single Camera and Multi-Camera screen. Refer to page 60. Enables the Alarm/Timer mode in the Image Transfer feature. Network Camera can transfer the image via e-mail or FTP. The alarm/timer trigger can be set on Image Transfer window. Refer to page 62. Sets White Balance and Power Line Frequency. You can lock the Brightness. Refer to page 74. The Multi-Camera screen needs to set up these parameters. Enter the Camera Names and IP addresses of each Network Camera. The MultiCamera can display up to four images in a window. Refer to page 76. [For assistance, please call: 1-800-272-7033] 47