Panasonic KX-HCM8 Network Camera - Page 88

Wall Mounting

Page 88 highlights

Operating Instructions Wall Mounting 1) Mount the Flexible Stand firmly to the wall or the beam using the three screws. 2) Attach Network Camera by screwing the threaded mount into the tripod mounting hole. 3) Adjust the position of Network Camera and secure the Flexible Stand. Do not over tighten. 1) 2) 3) Note Rear Mounting Adaptor can be used in wall mounting. Refer to page 89 for Rear Mounting Adaptor. 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118

Operating Instructions
88
Wall Mounting
Note
Rear Mounting Adaptor can be used in wall mounting. Refer to page 89 for
Rear Mounting Adaptor.
1)
Mount the Flexible Stand firmly to the wall or the beam using the three
screws.
2)
Attach Network Camera by screwing the threaded mount into the tripod
mounting hole.
3)
Adjust the position of Network Camera and secure the Flexible Stand.
Do not over tighten.
1)
2)
3)