Panasonic KX-HN1003 Installation Guide - Page 20
Initial setup for Android device, users, HomeHawk], Indoor HD Camera], Set up the HD Camera], SETUP
![]() |
View all Panasonic KX-HN1003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setup Initial setup (for Android device users) 1 Plug in the camera and wait about 1 minute for the camera's LED to light in green. R If the LED does not light in green, or if you experience trouble during this procedure, reset the camera (page 22) and then repeat this procedure. 2 Start the [HomeHawk] app. R The end-user license agreement is displayed the first time you start the app. 3 Follow the on-screen instructions. 4 Tap [Indoor HD Camera]. 5 Tap [Set up the HD Camera]. 6 When prompted, press the MSETUPN button on the back of the camera. R The LED indicator blinks in green. R The app temporarily changes your mobile device's wireless LAN setting so that it connects to the camera directly. 7 If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The camera and your mobile device connect to your wireless router. R If you enter the wrong password, an error is displayed. Repeat the initial setup procedure from the beginning. 8 When prompted, press the MSETUPN button on the back of the camera. R The camera registers your mobile device. 9 When prompted, set the password that will be used to access the camera. 10 When prompted, enter a name for your mobile device and then tap [OK]. R This setting allows you to change the name assigned to your device. It can help you identify your mobile device when performing certain operations, such as deregistering a mobile device. R A list of all cameras registered to the app is displayed when initial setup is complete. 20 For assistance, please visit http://shop.panasonic.com/support HN1003W_(en_en)_0302_ver001.pdf 20 2018/03/02 14:18:12
![](/manual_guide/products/panasonic-kxhn1003-installation-guide-0723313/20.png)