Panasonic KX-HN1003 Installation Guide - Page 22

Resetting the camera, For assistance, please visit

Page 22 highlights

Setup Resetting the camera Use this procedure if you have trouble setting up the camera. 1 Plug in the camera. 2 Using an object with a thin tip, press and hold the reset button on the back of the camera for about 10 seconds, then release the button when the camera beeps. RESET R The camera's settings are reset. 3 Wait for the camera's LED to light in green. Note: R After resetting the camera, you cannot use the camera again until it is set up. Refer to the relevant page in this section to set up the camera. 22 For assistance, please visit http://shop.panasonic.com/support HN1003W_(en_en)_0302_ver001.pdf 22 2018/03/02 14:18:13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Resetting the
camera
Use this procedure if you have
trouble setting up the camera.
1
Plug in the camera.
2
Using an object with a thin tip,
press and hold the reset
button on the back of the
camera for about 10 seconds,
then release the button when
the camera beeps.
RESET
RESET
R
The camera’s settings are
reset.
3
Wait for the camera’s LED to
light in green.
Note:
R
After resetting the camera, you
cannot use the camera again
until it is set up. Refer to the
relevant page in this section to
set up the camera.
22
For assistance, please visit http://shop.panasonic.com/support
Setup
HN1003W_(en_en)_0302_ver001.pdf
22
2018/03/02
14:18:13