Panasonic KX-HNC505 Information and Troubleshooting Guide - Page 6

LED indicator Off Yellow Green lit blinking slowly lit Blue Red blinking slowly blinking quickly lit lit blinking blinking slowly Status • No power • LED indicator is turned off *1 Not registered to your wireless router (usually for initial setup) or signal level is good *2 Initial setup is being performed using WPS on your router • Registration successfully completed *3 • Signal level is strong *2 Registration mode or updating Camera is searching for your wireless router Connected to the wireless router and camera is on • Registration failed *3 • Accessing microSD card (when using 24/7 recording) • Signal level is weak *2 • Camera is out of range of your wireless router *2 • Wireless LAN connection failed • Device error (fan error)*4 • Streaming data *1 or detecting motion *1 • Accessing microSD card (when not using 24/7 recording) *1 You can configure the camera so that its LED indicator does not light during normal operation from the camera settings of the app. For more information, access the User's Guide (page 3). *2 The signal level (strong, good, weak, out of range) is shown for 3 seconds after pressing SETUP button. *3 Lights for 3 seconds after registration is successfully completed or failed. *4 Unplug the camera and then plug it in again. If the message is still displayed, contact an authorized service center. 6