Panasonic KX-HNS103 KX-HNS103 Installation Guide - Page 10

Confirming the, usage area

Page 10 highlights

Setup group them by location. For more information, refer to the User's Guide (page 18). Confirming the usage area Wireless communication range The wireless communication range of each device in the system from the hub is approximately 50 m (160 feet) indoors and approximately 300 m (1,000 feet) outdoors. Wireless communication may be unreliable when the following obstacles are located between the hub and other devices. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using each device on separate floors or in different buildings Note: R You can check the sensor's communication status by pressing M N. If the LED indicator is lit in green or red, the sensor is communicating properly with the hub. If the LED indicator blinks in red, it is out of range of the hub. 10 For assistance, please visit www.panasonic.com/support )/4@ FO@FO @@WFSQEG

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

group them by location. For more
information, refer to the User’s Guide
(page 18).
Confirming the
usage area
Wireless communication
range
The wireless communication range of
each device in the system from the hub
is approximately 50 m (160 feet)
indoors and approximately 300 m
(1,000 feet) outdoors. Wireless
communication may be unreliable
when the following obstacles are
located between the hub and other
devices.
R
Metal doors or screens
R
Walls containing aluminum-sheet
insulation
R
Walls made of concrete or
corrugated iron
R
Double-pane glass windows
R
Multiple walls
R
When using each device on
separate floors or in different
buildings
Note:
R
You can check the sensor’s
communication status by pressing
M
N
. If the LED indicator is lit in
green or red, the sensor is
communicating properly with the
hub. If the LED indicator blinks in
red, it is out of range of the hub.
10
For assistance, please visit www.panasonic.com/support
Setup
HNS103_(en_en)_0203_ver.062.pdf
10
2015/02/03
20:01:37