Panasonic KX-HNS103 KX-HNS103 Installation Guide - Page 15
Securing with double-sided tape only
View all Panasonic KX-HNS103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setup Securing with double-sided tape only Note: R Make sure any surfaces that will make contact with the double-sided tape are clean and dry before applying the tape. When attaching the double-sided tape to concrete or bricks, if the surface of the concrete or bricks is wet, make sure to completely dry the surface before attaching the double-sided tape. 1 Remove the backing from the double-sided tape, attach the main unit and the probe unit to the installation surface, and then press firmly on each unit to ensure solid adhesion to the installation surface. 1 Double-sided tape 1 1 1 Note: R To install the probe unit on a floor, see page 16. For assistance, please visit www.panasonic.com/support 15 )/4@ FO@FO @@WFSQEG
Securing with double-sided tape only
Note:
R
Make sure any surfaces that will make contact with the double-sided tape are
clean and dry before applying the tape. When attaching the double-sided tape to
concrete or bricks, if the surface of the concrete or bricks is wet, make sure to
completely dry the surface before attaching the double-sided tape.
1
Remove the backing from the double-sided tape, attach the main unit and the
probe unit to the installation surface, and then press firmly on each unit to
ensure solid adhesion to the installation surface.
1
Double-sided tape
1
1
1
Note:
R
To install the probe unit on a floor, see page 16.
For assistance, please visit www.panasonic.com/support
15
Setup
HNS103_(en_en)_0203_ver.062.pdf
15
2015/02/03
20:01:37