Panasonic KX-HNS103 KX-HNS103 Installation Guide - Page 12

Setup R Install the probe unit so that the metal probes are horizontal. A water leak can only be detected if water touches both of the metal probes; if water touches only one of the probes, a water leak will not be detected. Correct installation Metal probes are horizontal to the floor Incorrect installation Metal probes are not horizontal to the floor Installation location Install the water leak sensor in a basement, kitchen, utility room, or anywhere you want to detect a water leak. Common installation examples include near a washing machine, hot water heater, or a location where a water leak has occurred in the past. Note: R Install the probe unit so that its metal probes are about 1 mm (1/32 inches) above the floor. If the probes touch the floor, the sensor may make false detections. If the probes are too far from the floor, water leaks can only be detected after the leaked water has become deep enough to touch the probes. R Install the main unit 1 m (3 feet 3 inches) or higher above the floor. The main unit is not waterproof; if it becomes wet, the sensor may become damaged and water leaks will not be detected properly. 12 For assistance, please visit www.panasonic.com/support )/4@ FO@FO @@WFSQEG