Panasonic KX-TG1063PK Expand Digital Ans Sys - Multi Language - Page 43
Useful Information, Making/answering calls, intercom, Caller ID, Problem, Cause/solution
View all Panasonic KX-TG1063PK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Useful Information Problem I fully charged the batteries, but ) still flashes or 0 is displayed. I fully charged the batteries, but the operating time seems to be shorter. Cause/solution L Clean the charge contacts and charge again (page 9). L It is time to replace the batteries (page 8). L Clean the battery ends (S, T) and the charge contacts with a dry cloth and charge again. Making/answering calls, intercom Problem w is flashing. Noise is heard, sound cuts in and out. The base unit and/or handset does not ring. I cannot make a call. I cannot make long distance calls. Cause/solution L The handset is too far from the base unit. Move closer. L The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L You are using the base unit or handset in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L The handset is not registered to the base unit. Register it (page 27). L You are using the base unit or handset in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L Move closer to the base unit. L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. L The ringer volume is turned off. Adjust the ringer volume (page 14). L Silent mode is turned on. Turn it off (page 25). L The dialing mode may be set incorrectly. Change the setting (page 12). L The handset is too far from the base unit. Move closer and try again. L Make sure that you have long distance service. Caller ID Problem Caller information is not displayed. Cause/solution L You must subscribe to Caller ID service. Contact your service provider/telephone company for details. L If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. L The name display service may not be available in some areas. Contact your service provider/telephone company for details. L Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again. For assistance, please visit http://www.panasonic.com/help 43