Panasonic KX-TG885SK Quick Guide - Page 17

Using a Bluetooth headset (optional) By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on landline calls. R Only 1 Bluetooth device can be used with the unit at a time*1. *1 You cannot use a Bluetooth headset to talk on a cellular line. Pairing a Bluetooth headset to the base unit 1 Bluetooth headset: Set your headset to pairing mode. R Refer to the headset's operating instructions. 2 Handset: MMENUN#621 3 If your headset PIN is "0000", go to step 4. If your headset PIN is not "0000", press MCLEARN, then enter your headset's PIN. R Typically, default PIN is "0000". Refer to the headset's operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When is displayed on the base unit, the headset is available for use. Getting Started When you finish talking, press your headset's button referring to your headset's operating instructions. Note: R If you cannot hang up the call using your headset, press MZN on the base unit 2 times. Switching between the base unit and your headset You can switch between the base unit and your headset: - during a landline call with the base unit speakerphone. - during an intercom call between the base unit and handset. - while listening to messages recorded on the base unit answering system. n To switch to your headset: Press M N on the base unit. n To switch to the base unit: Press MZN on the base unit. Operating a Bluetooth headset using a landline Important: R Refer to your headset's operating instructions for details. Answering landline calls with your headset To answer a landline call, press your headset's button referring to your headset's operating instructions. For assistance, please visit http://shop.panasonic.com/support 17