Panasonic KX-TGC352B Operating Manual - Page 30

Useful Information, Battery recharge, Making/answering calls, intercom

Get Panasonic KX-TGC352B PDF manuals and user guides View all Panasonic KX-TGC352B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Useful Information Problem I cannot hear a dial tone. Time on the unit has shifted. Cause/solution R The base unit's AC adaptor or telephone line cord is not connected. Check the connections. R Incorrect time information from incoming Caller ID changes the time. Set the time adjustment to "Manual" (off) (page 18). Battery recharge Problem I fully charged the batteries, but - still flashes, - is displayed, or - the operating time seems to be shorter. Cause/solution R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 8). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset does not ring. I cannot make a call. Cause/solution R The handset is too far from the base unit. Move closer. R The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 22). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume is turned off. Adjust the ringer volume (page 12, 18). R Silent mode is turned on. Turn it off (page 20). R The dialing mode may be set incorrectly. Change the setting (page 11). 30 For assistance, please visit http://shop.panasonic.com/support TGC35x_36x(en)_1116_ver012.pdf 30 2015/11/16 9:16:36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Problem
Cause/solution
I cannot hear a dial tone.
R
The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
Time on the unit has shifted.
R
Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
“
Manual
”
(off) (page 18).
Battery recharge
Problem
Cause/solution
I fully charged the batteries, but
–
still flashes,
–
is displayed, or
–
the operating time seems to
be shorter.
R
Clean the battery ends (
,
) and the charge contacts
with a dry cloth and charge again.
R
It is time to replace the batteries (page 8).
Making/answering calls, intercom
Problem
Cause/solution
is displayed.
R
The handset is too far from the base unit. Move closer.
R
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R
The handset is not registered to the base unit. Register it
(page 22).
Noise is heard, sound cuts in
and out.
R
You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
R
Move closer to the base unit.
R
If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset does not ring.
R
The ringer volume is turned off. Adjust the ringer volume
(page 12, 18).
R
Silent mode is turned on. Turn it off (page 20).
I cannot make a call.
R
The dialing mode may be set incorrectly. Change the
setting (page 11).
30
For assistance, please visit http://shop.panasonic.com/support
Useful Information
TGC35x_36x(en)_1116_ver012.pdf
30
2015/11/16
9:16:36