Panasonic KX-THA12 Telephone Equipments - Page 48
Setting telephone line, Line selection, SELECT, LINE1, Dialing mode, Flash time, Important, FLASH
UPC - 037988476299
View all Panasonic KX-THA12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Programmable Settings Setting telephone line Line selection The line selection mode determines which line is selected when you press {C}. - "Auto": When making a call, line 1 is selected. If that line is unavailable, line 2 is selected. When answering a call, the ringing line is selected. - "Line1": Line 1 is selected. - "Line2": Line 2 is selected. 1 {MENU} (F2) i x i {SELECT} 2 "Set tel line" i {SELECT} 3 "Line select" i {SELECT} 4 Select the desired setting. (Default: "Auto") i {SAVE} i {OFF} Note: L You can select a line manually regardless of the line selection mode by pressing {LINE1} or {LINE2}. Dialing mode If you cannot make calls, change this setting depending on your telephone line service. "Tone": For tone dial service. "Pulse": For rotary pulse dial service. L You only need to program this setting once, using either the handset or base unit. 1 {MENU} (F2) i x i {SELECT} 2 "Set tel line" i {SELECT} 3 "Set dial mode" i {SELECT} 4 Select the desired setting. (Default: "Tone") i {SAVE} i {OFF} Flash time The flash time depends on your telephone exchange or host PBX. L You only need to program this setting once, using either the handset or base unit. Important: L The setting should stay at 700 ms unless pressing {FLASH} fails to pick up the Call Waiting call. 1 {MENU} (F2) i x i {SELECT} 2 "Set tel line" i {SELECT} 3 "Set flash time" i {SELECT} 4 Select the desired line. 5 Select the desired setting. (Default: "700ms") i {SAVE} i {OFF} Note: L If the base unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly. Consult your PBX supplier for the correct setting. Line mode Generally, the line mode setting should not be adjusted. When another phone connected to the same line is in use, and - if k or l is not displayed on the handset, or - if {LINE1} or {LINE2} is not flashing on the base unit, you need to change the line mode to "A". L You only need to program this setting once, using either the handset or base unit. 1 {MENU} (F2) i x i {SELECT} 2 "Set tel line" i {SELECT} 3 "Set line mode" i {SELECT} 4 Select the desired line. 5 Select the desired setting. (Default: "B") i {SAVE} i {OFF} 48 For assistance, please visit http://www.panasonic.com/phonehelp