Panasonic KXTG1064 KXTG1064 User Guide - Page 26
Call block Caller ID subscribers, Block calls without phone number
View all Panasonic KXTG1064 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Programming Call block (Caller ID subscribers only) This feature allows the unit to reject calls when: - the unit receives a call from a phone number stored in the call block list as unwanted ("Storing unwanted callers", page 26). - the unit receives a call without phone number ("Block calls without phone number", page 26). When a call is received, the unit rings for a short time while the caller is being identified. If the unit recognizes the call as unwanted, "Caller blocked" is displayed and the unit sends out a busy tone to the caller, and then disconnects the call. Program this setting using either the base unit or one of the handsets. Important: L When the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 28) with $ after the call is disconnected. Handset: {OFF} ■ By entering phone numbers: 1 {MENU} i {#}{2}{1}{7} i {ADD} 2 Enter the phone number (24 digits max.). L To erase a digit, press {CLEAR}. 3 {SAVE} 4 Proceed with the operation for your unit. Base unit: {■} (EXIT) Handset: {OFF} Block calls without phone number You can reject a call without phone number including "Out of area", "Private caller", or "Long distance". = Base unit / Y Handset 1 {MENU} i {#}{2}{4}{0} 2 {V}/{^}: Select the desired setting. i {SAVE} 3 Proceed with the operation for your unit. Base unit: {■} (EXIT) Handset: {OFF} Storing unwanted callers You can store up to 30 phone numbers in the call block list by using the caller list or by entering the numbers directly. Important: L It is advised to store the 10 digits (including an area code) because if 7 digits are stored, all numbers that have the last 7 digits will be blocked. = Base unit / Y Handset ■ From the caller list: 1 Proceed with the operation for your unit. Base unit: {CID} Handset: {MENU} i {V}/{^}: "Caller list" i {SELECT} 2 {V}/{^}: Select the entry to be blocked. L To edit the number, press {EDIT} repeatedly until the phone number is shown in the 10-digit format. 3 {SAVE} 4 {V}/{^}: "Call block" i {SELECT} 5 {V}/{^}: "Yes" i {SELECT} 6 Proceed with the operation for your unit. Base unit: {■} (EXIT) Viewing/editing/erasing call block numbers = Base unit / Y Handset 1 {MENU} i {#}{2}{1}{7} 2 {V}/{^}: Select the desired entry. L To exit, press {■} (EXIT) on the base unit or {OFF} on the handset. 3 Proceed with the desired operation. ■ Editing a number: {EDIT} i Edit the phone number. i {SAVE} i Press {■} (EXIT) on the base unit or {OFF} on the handset. ■ Erasing a number: {ERASE} (soft key) i {V}/{^}: "Yes" i {SELECT} i Press {■} (EXIT) on the base unit or {OFF} on the handset. Note: L When editing, press the desired dial key to add, {CLEAR} to erase. L When viewing, {w/o NUM} appears if the block calls without phone number feature is turned on. To turn the feature off: {w/o NUM} i {V} i {SAVE} i Press {■} (EXIT) on the base unit or {OFF} on the handset. 26 For assistance, please visit http://www.panasonic.com/help