Panasonic KXTG2214P KXTG2214F User Guide - Page 11

Preparation Programmable Functions Useful information: • If Select is pressed while "---(Go back)---" is displayed, the unit will go back to the previous menu mode. If you press the key in the main menu, the unit will exit programming mode. • After programming is complete, the display will return to the main menu or the sub-menu depending on which menu the selected item is located. (See the menu table below.) • You can exit programming mode any time by pressing [OFF]. • If you do not press any buttons for 60 seconds, the handset will exit programming mode. • If the handset has lost communication with the base unit, the handset beeps 3 times and "No link to base. Place on cradle and try again." is displayed. • If [ ], [ ] or any other buttons except [MUTE] and [OFF] is pressed while the handset is on the base unit, the handset beeps 3 times and "Please lift up and try again." is displayed. Lift the handset and press the button again. Function Menu Table You can use the following functions to customize your unit. See the corresponding pages for function details. • After pressing [MENU], you can also program menu items by direct commands ([0] to [9]) instead of using the soft keys (p. 39). Main menu Ringer setting V.M. access p. 32 Voice enhancer p. 13 Initial setting Sub-menu I Ringer volume p. 15 Ringer tone p. 16 LCD contrast p. 14 Auto talk p. 14 Caller ID edit p. 23 Set tel line Voice Mail Change language p. 12 Sub-menu II Set dial mode Set flash time Set line mode p. 12 p. 35 p. 16 Store VM access# p. 30 VM tone detect p. 31 For assistance, please call: 1-800-211-PANA(7262) 11