Panasonic KXTG4731 KXTG4731 User Guide - Page 49
Battery recharge, Making/answering calls, intercom, Problem, Cause/solution, For assistance
View all Panasonic KXTG4731 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Useful Information Battery recharge Problem The handset beeps and/or flashes. I fully charged the batteries, but - still flashes, - is displayed, or - the operating time seems to be shorter. Cause/solution R Battery charge is low. Fully charge the batteries (page 11). R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 11). Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset does not ring. The base unit does not ring. I cannot make a call. I cannot make long distance calls. Cause/solution R The handset is too far from the base unit. Move closer. R The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 31). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume is turned off. Adjust the ringer volume (page 18). R Silent mode is turned on. Turn it off (page 29). R The ringer volume is turned off. Adjust the ringer volume (page 18). R The dialing mode may be set incorrectly. Change the setting (page 16). R Make sure that you have long distance service. For assistance, please visit http://www.panasonic.com/help 49